The recommended land pattern for the V10K100DU-M3/H is a rectangular pad with a size of 2.5 mm x 1.5 mm, with a 0.5 mm radius corner and a 0.3 mm solder mask clearance.
While the V10K100DU-M3/H is rated for operation up to 150°C, it's essential to consider the derating curve and ensure that the device does not exceed its maximum power rating at elevated temperatures. Consult the datasheet and application notes for more information.
Handle the device by the body, avoiding touching the leads or the ceramic substrate. Use a vacuum pickup or tweezers to handle the device, and avoid bending or flexing the leads. For rework, use a low-temperature soldering iron and a solder with a melting point below 260°C.
The maximum allowable voltage for the V10K100DU-M3/H is 100 V, as specified in the datasheet. Exceeding this voltage may result in device damage or failure.
The V10K100DU-M3/H is designed to operate in a normal humidity environment. However, it's essential to follow proper storage and handling procedures to prevent moisture absorption. If the device is exposed to high humidity, ensure it is properly dried and stored according to the manufacturer's recommendations.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
V10K100DU-M3/H Overview
Use the download button to access the V10K100DU-M3/H 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like V10K1,
or try a keyword search, such as Rectifier Diodes
