Littelfuse recommends a PCB layout with a large copper area connected to the thermal pad to dissipate heat efficiently. A minimum of 1 oz copper thickness and a thermal relief pattern around the device are also recommended.
Littelfuse recommends using a soldering iron with a temperature of 250°C to 260°C and a solder with a melting point of 180°C to 190°C. The device should be soldered within 3 seconds to 5 seconds, and the solder joints should be inspected for proper wetting and filleting.
The V14E17P has a maximum surge current rating of 100 A for 10 ms, but this value can vary depending on the specific application and environmental conditions. It's recommended to consult with Littelfuse or a qualified engineer for specific guidance.
Yes, the V14E17P is designed to meet the requirements of high-reliability and safety-critical applications. However, it's essential to follow Littelfuse's recommended design and testing guidelines to ensure the device meets the specific application requirements.
The V14E17P is designed to operate up to 150°C, but its performance may degrade at higher temperatures. Littelfuse recommends derating the device's current rating by 1.5% per degree Celsius above 125°C to ensure reliable operation.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
V14E17P Overview
Use the download button to access the V14E17P schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like V14E1,
or try a keyword search, such as Non-linear Resistors
