The recommended PCB footprint for the V350SM10 is a rectangular pad with dimensions of 3.5mm x 1.5mm, with a 1.5mm x 0.5mm thermal pad in the center. The pad should be solder-mask defined and have a non-solder-mask-defined area of 2.5mm x 1.5mm for the thermal tab.
To ensure reliable soldering of the V350SM10, use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the PCB pads. Use a reflow oven with a peak temperature of 240°C to 250°C, and a dwell time of 30 seconds to 60 seconds. Avoid using excessive solder or flux, as this can cause the device to fail.
The maximum surge current rating of the V350SM10 is 100A, with a pulse width of 10ms and a repetition rate of 100Hz. However, it's recommended to derate the surge current to 50A for repetitive surges to ensure reliable operation.
The V350SM10 is rated for operation up to 150°C, but it's recommended to derate the voltage and current ratings at high temperatures. For example, at 125°C, the maximum voltage rating is 250V, and the maximum current rating is 10A. Consult the datasheet for detailed derating information.
To select the correct fuse for your application, consider the maximum voltage, current, and power rating of your circuit. Choose a fuse with a voltage rating that matches or exceeds the maximum voltage of your circuit, and a current rating that is at least 1.5 times the maximum current of your circuit. Also, consider the fuse's interrupting rating, which should be at least 10kA for most applications.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
V350SM10 Overview
Use the download button to access the V350SM10 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like V350S,
or try a keyword search, such as Non-linear Resistors
