Vishay provides a recommended PCB layout and land pattern in their application note AN10343, which can be found on their website. It's essential to follow these guidelines to ensure proper thermal performance and to prevent thermal runaway.
The VFT3045CBP-M3/4W comes with a pre-applied TIM. However, if you need to rework or replace the TIM, Vishay recommends using a thermal interface material with a thermal conductivity of at least 1 W/m-K. Apply a thin, uniform layer of TIM to the device's thermal pad, and ensure good contact between the device and the heat sink.
Vishay recommends derating the maximum voltage by 10% to ensure reliable operation and to prevent electrical overstress. For example, if the maximum rated voltage is 45 V, the derated voltage would be 40.5 V.
Follow the recommended soldering profile and guidelines provided in the Vishay application note AN10226. Ensure the soldering temperature does not exceed 260°C, and the soldering time is within the recommended range of 3-5 seconds. Use a solder with a melting point above 217°C to prevent solder joint fatigue.
Store the VFT3045CBP-M3/4W in a dry, cool place, away from direct sunlight and moisture. Handle the devices by the body, avoiding touching the leads or thermal pad to prevent electrical discharge damage. Use anti-static packaging and follow ESD handling procedures to prevent damage during storage and handling.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
VFT3045CBP-M3/4W Overview
Use the download button to access the VFT3045CBP-M3/4W schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like VFT30,
or try a keyword search, such as Rectifier Diodes
