Vishay provides a recommended PCB layout and land pattern in their application note AN10343, which can be found on their website. It's essential to follow these guidelines to ensure proper thermal performance and reliability.
The datasheet recommends using a thermal interface material (TIM) with a thermal conductivity of at least 1 W/m-K. A thin layer of TIM (typically 0.05 mm to 0.1 mm) should be applied to the device's thermal pad. Ensure the TIM is evenly spread and free of air pockets to maximize heat transfer.
While the datasheet specifies the maximum voltage rating, it's essential to derate the voltage based on the operating temperature and other environmental factors. As a general guideline, a 10% to 20% voltage derating is recommended to ensure long-term reliability and prevent premature failure.
Follow the recommended soldering profile and guidelines provided in the datasheet. Ensure the soldering iron temperature is within the specified range (250°C to 260°C), and the soldering time is limited to 3 seconds to 5 seconds. Avoid excessive soldering temperature, as it can cause damage to the device.
Store the devices in their original packaging or in a dry, ESD-protected environment. Avoid exposing the devices to moisture, direct sunlight, or extreme temperatures. Handle the devices by the body, avoiding touching the leads or electrical contacts to prevent ESD damage.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
VLMS20H2K1-GS08 Overview
Use the download button to access the VLMS20H2K1-GS08 schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like VLMS2,
or try a keyword search, such as Visible LEDs
