VLMS20J2L1-GS08 footprint, schematic symbol and 3D model by Vishay

Symbol

PCB Footprints

3D Models

VLMS20J2L1-GS08 Details

A recommended PCB layout for optimal thermal performance would be to use a large copper pad under the device, connected to a thermal via or a heat sink. This helps to dissipate heat efficiently and reduce thermal resistance.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. Apply a small amount of solder paste to the pads, and use a reflow oven or a hot air gun to solder the component.
The maximum allowed voltage derating for the VLMS20J2L1-GS08 is 80% of the rated voltage. This means that if the device is rated for 20V, the maximum allowed voltage derating would be 16V.
To handle ESD protection for the VLMS20J2L1-GS08, use an ESD wrist strap or mat when handling the device, and ensure that the PCB has ESD protection components such as TVS diodes or ESD protection arrays.
The recommended storage condition for the VLMS20J2L1-GS08 is in a dry, cool place with a temperature range of 5°C to 30°C and humidity below 60%. Avoid storing the device in direct sunlight or near heat sources.

System Verified

Use the download button to access the VLMS20J2L1-GS08 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like VLMS2, or try a keyword search, such as Visible LEDs

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →