The recommended PCB footprint for the VS-36MT20 is a rectangular pad with dimensions of 3.8 mm x 2.5 mm, with a 1.5 mm x 1.5 mm thermal pad in the center. The pad should have a solder mask defined (SMD) and a non-solder mask defined (NSMD) area around the thermal pad.
To ensure reliable soldering, use a soldering iron with a temperature range of 250°C to 260°C, and a solder with a melting point of 217°C to 220°C. Apply a small amount of solder paste to the PCB pads, and use a reflow oven or a hot air soldering station to solder the component.
The maximum allowed voltage derating for the VS-36MT20 is 80% of the maximum rated voltage. For example, if the maximum rated voltage is 20 V, the derated voltage should not exceed 16 V.
The VS-36MT20 is rated for operation up to 150°C. However, it's recommended to derate the voltage and current ratings according to the temperature derating curve provided in the datasheet to ensure reliable operation.
Handle the VS-36MT20 with care to avoid mechanical stress, bending, or twisting. Store the components in their original packaging or in a dry, cool place, away from direct sunlight and moisture. Avoid exposing the components to temperatures above 30°C or humidity above 60%.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
VS-36MT20 Overview
Use the download button to access the VS-36MT20 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like VS-36,
or try a keyword search, such as Bridge Rectifier Diodes
