Part Image

W25N512GVFIG - Winbond

Description: 512Mb Serial NAND Flash Memory with uniform 2KB+64B page size and set Buffer Read Mode as default

Download W25N512GVFIG Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
W25N512GVFIG - Winbond  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

W25N512GVFIG Details

  • Manufacturer Part Number:

    W25N512GVFIG

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOIC-16

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Manufacturer:

    Winbond Electronics Corp

  • YTEOL:

    6.2

  • Clock Frequency-Max (fCLK):

    166 MHz

  • Data Retention Time-Min:

    10

  • Endurance:

    100000 Write/Erase Cycles

  • JESD-30 Code:

    R-PDSO-G16

  • Length:

    10.31 mm

  • Memory Density:

    536870912 bit

  • Memory IC Type:

    FLASH

  • Memory Width:

    8

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Number of Words:

    67108864 words

  • Number of Words Code:

    64000000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    64MX8

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.4

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Parallel/Serial:

    SERIAL

  • Peak Reflow Temperature (Cel):

    NOT SPECIFIED

  • Programming Voltage:

    3 V

  • Seated Height-Max:

    2.64 mm

  • Serial Bus Type:

    QSPI

  • Standby Current-Max:

    0.00005 A

  • Supply Current-Max:

    0.035 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    2.7 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    NOT SPECIFIED

  • Type:

    SLC NAND TYPE

  • Width:

    7.49 mm

  • Write Protection:

    HARDWARE/SOFTWARE

W25N512GVFIG Frequently Asked Questions (FAQs)

  • The W25N512GVFIG has a minimum of 100,000 erase cycles per sector, and a total of 2,000,000 erase cycles for the entire device.
  • The HOLD# pin should be pulled high during power-up and power-down to prevent any unwanted commands from being executed. It's recommended to connect a pull-up resistor to VCC.
  • The recommended clock frequency for the W25N512GVFIG is up to 104 MHz. However, it's recommended to check the specific application requirements and adjust the clock frequency accordingly.
  • The WP# pin is used to enable or disable write protection. When WP# is low, the entire memory array is write-protected. When WP# is high, the memory array is not write-protected. It's recommended to connect a pull-up resistor to VCC to enable write protection by default.
  • The W25N512GVFIG has a typical read latency of 30ns, and a typical program latency of 300us. The erase latency varies depending on the sector size, but it's typically around 1.5ms for a 4KB sector.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

W25N512GVFIG Overview

Use the download button to access the W25N512GVFIG 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like W25N5, or try a keyword search, such as Flash Memories

Parts related to W25N512GVFIG

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview