Part Image

W25Q32JVTCIM - Winbond

Description: 32Mb Serial NOR Flash 133MHz TFBGA (4X6)24

Download W25Q32JVTCIM Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
W25Q32JVTCIM - Winbond PCB footprint - BGA - BGA - 24-Ball TFBGA 8x6-mm (Package Code TC, 6x4 ball array)
click to zoom
3D Models
W25Q32JVTCIM - Winbond  - 3D model - BGA - 24-Ball TFBGA 8x6-mm (Package Code TC, 6x4 ball array)
click to zoom

W25Q32JVTCIM Details

  • Manufacturer Part Number:

    W25Q32JVTCIM

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    End Of Life

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.32.00.51

  • Manufacturer:

    Winbond Electronics Corp

  • YTEOL:

    0

  • Clock Frequency-Max (fCLK):

    133 MHz

  • Data Retention Time-Min:

    20

  • Endurance:

    100000 Write/Erase Cycles

  • JESD-30 Code:

    R-PBGA-B24

  • Length:

    8 mm

  • Memory Density:

    33554432 bit

  • Memory IC Type:

    FLASH

  • Memory Width:

    8

  • Number of Functions:

    1

  • Number of Terminals:

    24

  • Number of Words:

    4194304 words

  • Number of Words Code:

    4000000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Organization:

    4MX8

  • Output Characteristics:

    3-STATE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TBGA

  • Package Equivalence Code:

    BGA24,4X6,40

  • Package Shape:

    RECTANGULAR

  • Package Style:

    GRID ARRAY, THIN PROFILE

  • Parallel/Serial:

    SERIAL

  • Programming Voltage:

    3 V

  • Seated Height-Max:

    1.2 mm

  • Serial Bus Type:

    QSPI

  • Standby Current-Max:

    0.000015 A

  • Supply Current-Max:

    0.025 mA

  • Supply Voltage-Max (Vsup):

    3.6 V

  • Supply Voltage-Min (Vsup):

    2.7 V

  • Supply Voltage-Nom (Vsup):

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Form:

    BALL

  • Terminal Pitch:

    1 mm

  • Terminal Position:

    BOTTOM

  • Type:

    NOR TYPE

  • Width:

    6 mm

  • Write Protection:

    HARDWARE/SOFTWARE

W25Q32JVTCIM Frequently Asked Questions (FAQs)

  • The W25Q32JVTCIM has a minimum of 100,000 erase cycles per sector, and a total of 20,000,000 erase cycles for the entire device.
  • The HOLD# pin should be pulled high during power-up and power-down to prevent any unwanted commands from being executed. It's recommended to connect a pull-up resistor to VCC and a capacitor to GND to ensure a clean signal.
  • The W25Q32JVTCIM supports clock frequencies up to 104 MHz. However, it's recommended to use a clock frequency of 50 MHz or lower to ensure reliable operation and minimize power consumption.
  • The WP# pin should be pulled high during normal operation to enable write operations. If the WP# pin is pulled low, the device will be in a protected state, and write operations will be disabled.
  • The QPI mode allows the W25Q32JVTCIM to operate in a quad-bus mode, where four bits of data are transferred simultaneously, increasing the data transfer rate. This mode is useful for high-speed applications that require fast data transfer.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

W25Q32JVTCIM Overview

Use the download button to access the W25Q32JVTCIM schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like W25Q3, or try a keyword search, such as Flash Memories

Parts related to W25Q32JVTCIM

Showing 0 results

W25Q32JVTCIM Alternates

Showing results

Image Part Number Model
Part Image W25Q32JVTCJQ Winbond Electronics Corp

Flash