The thermal resistance of the WLAR030FET is typically around 2.5°C/W, but this can vary depending on the specific application and mounting method. It's recommended to consult with Ohmite's application engineers for more detailed information.
While the WLAR030FET is primarily designed for low-frequency applications, it can be used in high-frequency applications up to 100 kHz with some limitations. However, the device's performance may degrade at higher frequencies due to parasitic inductance and capacitance. It's recommended to consult with Ohmite's application engineers to determine the suitability of the device for specific high-frequency applications.
The recommended mounting method for the WLAR030FET is to use a thermally conductive interface material (such as thermal grease or thermal tape) between the device and a heat sink or PCB. This helps to minimize thermal resistance and ensure reliable operation. Ohmite also recommends following the recommended PCB layout and thermal management guidelines to ensure optimal performance.
The WLAR030FET is rated for operation up to 150°C, but its performance may degrade at higher temperatures. Ohmite recommends derating the device's power rating at higher temperatures to ensure reliable operation. It's also important to consider the thermal management and cooling requirements for high-temperature applications.
The WLAR030FET is rated for a maximum voltage of 30V, and it's not recommended to use it in high-voltage applications exceeding this rating. Using the device in high-voltage applications can lead to premature failure or damage. If high-voltage operation is required, Ohmite recommends considering alternative devices specifically designed for high-voltage applications.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
WLAR030FET Overview
Use the download button to access the WLAR030FET 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like WLAR0,
or try a keyword search, such as Fixed Resistors
