1 X 1 MM, 0.50 MM HEIGHT, PLASTIC, SOT-891, XSON-6
Pin Count:
6
Manufacturer Package Code:
SOT891
HTS Code:
8542.39.00.60
Manufacturer:
Nexperia
YTEOL:
0
Control Type:
ENABLE LOW
Count Direction:
UNIDIRECTIONAL
Family:
AHCT/VHCT/VT
JESD-30 Code:
S-PDSO-N6
JESD-609 Code:
e3
Length:
1 mm
Load Capacitance (CL):
50 pF
Logic IC Type:
BUS DRIVER
Max I(ol):
0.008 A
Moisture Sensitivity Level:
1
Number of Bits:
1
Number of Functions:
1
Number of Ports:
2
Number of Terminals:
6
Operating Temperature-Max:
125 °C
Operating Temperature-Min:
-40 °C
Output Characteristics:
3-STATE
Output Polarity:
TRUE
Package Body Material:
PLASTIC/EPOXY
Package Code:
VSON
Package Shape:
SQUARE
Package Style:
SMALL OUTLINE, VERY THIN PROFILE
Peak Reflow Temperature (Cel):
260
Power Supply Current-Max (ICC):
75 mA
Prop. Delay@Nom-Sup:
9.5 ns
Propagation Delay (tpd):
9.5 ns
Seated Height-Max:
0.5 mm
Supply Voltage-Max (Vsup):
5.5 V
Supply Voltage-Min (Vsup):
4.5 V
Supply Voltage-Nom (Vsup):
5 V
Surface Mount:
YES
Technology:
CMOS
Temperature Grade:
AUTOMOTIVE
Terminal Finish:
TIN
Terminal Form:
NO LEAD
Terminal Pitch:
0.35 mm
Terminal Position:
DUAL
Time@Peak Reflow Temperature-Max (s):
30
Width:
1 mm
XC7SET125GF,132 Frequently Asked Questions (FAQs)
The recommended PCB footprint for XC7SET125GF,132 is a QFN128 package with a 12x12mm body size and 0.5mm pitch. The datasheet provides a recommended land pattern and solder mask design to ensure reliable assembly and thermal performance.
The XC7SET125GF,132 has a thermal pad on the bottom of the package that must be connected to a thermal ground plane on the PCB to dissipate heat efficiently. A thermal interface material (TIM) can be used to improve thermal conductivity. Additionally, the PCB design should ensure good airflow and heat dissipation around the device.
The maximum operating temperature range for XC7SET125GF,132 is -40°C to +125°C. However, the device can be operated at a higher temperature range with derating, but this may affect its reliability and performance.
To ensure EMC with XC7SET125GF,132, follow proper PCB design practices, such as using a solid ground plane, minimizing signal loop areas, and using shielding and filtering components as needed. Additionally, ensure that the device is properly decoupled and that the power supply is well-regulated.
The recommended power-up sequence for XC7SET125GF,132 is to power up the VCC supply before the VCCIO supply. This ensures that the internal voltage regulators are properly initialized and that the device operates correctly.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
XC7SET125GF,132 Overview
Use the download button to access the XC7SET125GF,132 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XC7SE,
or try a keyword search, such as Bus Driver/Transceivers
About Nexperia
Nexperia is a leading global player in the semiconductor industry. Specializing in essential electronic components, Nexperia offers a diverse range of products including discrete components, MOSFETs, logic ICs, and analog ICs. These components are integral to a multitude of applications across automotive, industrial, consumer electronics, and computing sectors, where reliability, performance, and efficiency are paramount.
