Torex recommends a 4-layer PCB with a solid ground plane and a separate power plane for the input and output. Keep the input and output traces as short as possible and avoid routing them near noise sources. Use a 10uF ceramic capacitor for input decoupling and a 1uF ceramic capacitor for output decoupling.
Ensure good airflow around the device, and avoid blocking the thermal pad on the bottom of the package. Use a thermal interface material (TIM) with a thermal conductivity of at least 1 W/m-K to improve heat dissipation. Keep the ambient temperature within the specified range of -40°C to 85°C.
Torex recommends a 10uF ceramic capacitor with an X7R or X5R dielectric, rated for at least 10V, as the input capacitor. This value provides a good balance between noise filtering and stability.
Yes, the XC9246B75CMR-G is suitable for high-reliability and automotive applications. It meets the AEC-Q100 standard for automotive reliability and is manufactured using a robust process with built-in quality controls. However, ensure that your design meets the specific requirements of your application, including temperature, vibration, and electrical stress.
Start by verifying the input voltage, output load, and PCB layout. Check for noise sources, such as switching regulators or high-frequency signals, near the XC9246B75CMR-G. Use an oscilloscope to measure the output voltage and input voltage ripple. Consult the datasheet and application notes for guidance on troubleshooting and optimization techniques.
Trust Checks
This model has been verified by system checks.
System Verified
Sponsored
XC9246B75CMR-G Overview
Use the download button to access the XC9246B75CMR-G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XC924,
or try a keyword search, such as Switching Regulator or Controllers
