Torex recommends a 4-layer PCB with a solid ground plane and a separate power plane for the input and output. The input and output capacitors should be placed as close as possible to the IC, and the feedback resistors should be placed close to the output pin. A detailed layout guide can be found in the Torex application note AN-104.
To ensure stability, it's essential to follow the recommended component values and PCB layout. Additionally, the output capacitor should be selected based on the output voltage and current requirements. A minimum output capacitance of 10uF is recommended, and the ESR should be less than 100mΩ. The input capacitor should be selected based on the input voltage and current requirements.
The maximum ambient temperature for reliable operation of XC9265C181MR-G is 85°C. However, the device can operate up to 105°C with derating. It's essential to ensure proper thermal design and heat dissipation to prevent overheating.
Yes, XC9265C181MR-G is designed to operate in high-vibration environments. However, it's essential to ensure that the PCB is properly secured and the components are properly soldered to prevent mechanical stress. Additionally, the device should be operated within the recommended temperature range to prevent thermal stress.
To troubleshoot issues with XC9265C181MR-G, start by verifying the input voltage and current, output voltage and current, and the feedback loop. Check for any signs of overheating, and ensure that the device is operated within the recommended temperature range. Use an oscilloscope to check for any oscillations or noise on the output. If the issue persists, consult the Torex application notes and contact Torex technical support for further assistance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
XC9265C181MR-G Overview
Use the download button to access the XC9265C181MR-G schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XC926,
or try a keyword search, such as Switching Regulator or Controllers
