The maximum operating temperature range for the XCR3064XL-6VQG44C is -40°C to 100°C (industrial grade) and 0°C to 85°C (commercial grade).
Clock signal routing for the XCR3064XL-6VQG44C requires careful planning to minimize skew and jitter. AMD recommends using a dedicated clock tree with a single clock source and using the device's built-in clock buffering and distribution capabilities.
The recommended power-up sequence for the XCR3064XL-6VQG44C is to power up the core voltage (VCC) first, followed by the I/O voltage (VCCIO), and then the auxiliary voltage (VCCAUX).
To optimize the XCR3064XL-6VQG44C for low power consumption, use the device's power-saving features such as clock gating, dynamic voltage and frequency scaling, and power-down modes. Additionally, optimize the design to minimize switching activity and use low-power I/O standards.
The maximum current draw for the XCR3064XL-6VQG44C depends on the operating frequency, voltage, and configuration. Refer to the datasheet for specific current draw values, but typically it ranges from 100mA to 500mA.
Trust Checks
This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
XCR3064XL-6VQG44C Overview
Use the download button to access the XCR3064XL-6VQG44C schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like XCR30,
or try a keyword search, such as Programmable Logic Devices
Suggested Parts
If you searched for XCR3064XL-6VQG44C, you might also be interested in these parts: