XUL536100.000000I footprint, schematic symbol and 3D model by Renesas Electronics

Symbol

PCB Footprints

3D Models

XUL536100.000000I Details

A 4-layer PCB with a solid ground plane and thermal vias is recommended. Keep the switching node (SW) and output capacitors close to the IC. Use a thermal relief pattern under the IC to improve heat dissipation.
Use the provided compensation calculator tool or consult the application note for guidance on selecting the optimal compensation components (R1, R2, C1, C2) based on the output capacitor and inductor values.
A low-ESR ceramic capacitor (e.g., X5R or X7R) with a value of 10-22μF is recommended. The capacitor should be placed close to the VIN pin to minimize noise and ripple.
Ensure the output capacitor has a low ESR, and the inductor has a low DCR. Keep the feedback network components (R1, R2, C1, C2) close to the FB pin. Avoid using a capacitor with high ESL in the output filter.
The EN pin can tolerate up to 6V, but it's recommended to keep it within 3.3V to ensure reliable operation.

Community Provided

System Verified

Community Approved

Use the download button to access the XUL536100.000000I schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like XUL53, or try a keyword search, such as XO

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →