Mini-Circuits recommends a 4-layer PCB with a solid ground plane on the bottom layer, and a via-stitched ground plane on the top layer. The device should be placed near the edge of the board to minimize signal reflections. A low-impedance path to ground is essential for the device's internal biasing network.
The ZDSS-3G4G-S+ requires a single +5V supply and a bias resistor (Rb) connected between the Vcc pin and the bias pin. The recommended value for Rb is 1 kΩ. Ensure the supply voltage is well-regulated and decoupled to prevent noise and oscillations.
The ZDSS-3G4G-S+ can handle up to +20 dBm (100 mW) of input power without damage. However, the device's performance may degrade at higher input powers. It's recommended to use an attenuator or limiter to prevent excessive input power.
The noise figure specification represents the device's noise contribution to the system, typically measured at a specific frequency and input power. The P1dB compression point represents the input power at which the device's gain is reduced by 1 dB. Both specifications are critical for system-level performance and should be considered in the design.
Yes, the ZDSS-3G4G-S+ is a sensitive device and requires proper ESD protection during handling and assembly. Use an ESD wrist strap or mat, and ensure the device is stored in an anti-static bag or container. Avoid touching the device's pins or exposed internal components to prevent damage.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
ZDSS-3G4G-S+ Overview
Use the download button to access the ZDSS-3G4G-S+ 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like ZDSS-,
or try a keyword search, such as Duplexers
About Mini-Circuits
Mini-Circuits is a global leader in the design, manufacturing, and distribution of RF and microwave components and systems. The company's product portfolio includes a vast array of components such as amplifiers, mixers, splitters, couplers, filters, switches, and attenuators, among others. These components cover frequency ranges from DC to 65 GHz and beyond, serving applications in wireless communication, satellite communication, radar systems, test and measurement equipment, medical devices, and more.
