A good PCB layout for the ZXRE1004DFTA should include a solid ground plane, short traces, and minimal inductance. Place the device close to the power source, and use a low-ESR capacitor for decoupling. A 4-layer PCB with a dedicated ground plane is recommended.
To ensure stability, ensure the output capacitor has a low ESR, and the output voltage is within the recommended range. Also, add a 10nF capacitor between the FB pin and GND to prevent oscillations. Additionally, use a low-impedance output capacitor and a high-PSRR LDO input capacitor.
Although the datasheet specifies a maximum input voltage of 5.5V, it's recommended to limit the input voltage to 5V to ensure reliable operation and prevent damage to the device.
The ZXRE1004DFTA is rated for operation up to 125°C. However, it's essential to consider the device's power dissipation and thermal resistance when operating in high-temperature environments. Ensure proper heat sinking and thermal management to prevent overheating.
The output voltage accuracy is affected by the internal voltage reference, resistor tolerance, and temperature. Calculate the output voltage accuracy by considering the internal voltage reference accuracy (±1.5%), resistor tolerance (±1%), and temperature coefficient (±0.05%/°C).
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ZXRE1004DFTA Overview
Use the download button to access the ZXRE1004DFTA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ZXRE1,
or try a keyword search, such as Voltage References
