Showing 25 of 9374 results
Filter by Manufacturer
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action |
---|
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
PS9513-AX
Renesas Electronics
|
1 | The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing an AlGaAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9513L1 is lead bending type for long creepage distance. The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for s | Dual-In-Line Packages | PS9513-AX |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RJAGFA#V0
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RJAGFA#V0 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
STM32F373CBT7
STMicroelectronics
|
1 | • Core: ARM® 32-bit Cortex®-M4 CPU (72 MHz\r\nmax), single-cycle multiplication and HW\r\ndivision, DSP instruction with FPU (floatingpoint unit) and MPU (memory protection unit)\r\n• 1.25 DMIPS/MHz (Dhrystone 2.1)\r\n• Memories\r\n– 64 to 256 Kbytes of Flash memory\r\n– 32 Kbytes of SRAM with HW parity check\r\n• CRC calculation unit\r\n• Reset and power management\r\n– Voltage range: 2.0 to 3.6 V\r\n– Power-on/Power down reset (POR/PDR)\r\n– Programmable voltage detector (PVD)\r\n– Low power modes: Sleep, Stop, Standby\r\n– VBAT s | Quad Flat Packages | STM32F373CBT7 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RJ8GFA#10
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RJ8GFA#10 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RJCAFA#V0
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RJCAFA#V0 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RBAGFP#10
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RBAGFP#10 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ISL9111EH50Z-T
Renesas Electronics
|
1 | The ISL9111 and ISL9111A provide a power supply solution for single-cell, dual-cell, or three-cell alkaline, NiCd or NiMH battery-powered applications. The device has a typical 0.8V start-up voltage and is capable of supplying up to 5.25V output voltage. Both devices are guaranteed to supply 100mA from a single-cell input and 240mA from a dual-cell input when output is 3.3V. High 1.2MHz switching frequency allows for the use of tiny, low-profile inductors and ceramic capacitors to minimize the size of the s | SOT23 (6-Pin) | ISL9111EH50Z-T |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ISL9111EH30Z-T7A
Renesas Electronics
|
1 | The ISL9111 and ISL9111A provide a power supply solution for single-cell, dual-cell, or three-cell alkaline, NiCd or NiMH battery-powered applications. The device has a typical 0.8V start-up voltage and is capable of supplying up to 5.25V output voltage. Both devices are guaranteed to supply 100mA from a single-cell input and 240mA from a dual-cell input when output is 3.3V. High 1.2MHz switching frequency allows for the use of tiny, low-profile inductors and ceramic capacitors to minimize the size of the s | SOT23 (6-Pin) | ISL9111EH30Z-T7A |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RB8GFP#10
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RB8GFP#10 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
PS9303L-E3-AX
Renesas Electronics
|
1 | The PS9303L and PS9303L2 are optical coupled high-speed, totem pole output (active high output type) isolators containing a GaAlAs LED on the input side and a photodiode and a signal processing circuit on the output side on one chip. The PS9303L and PS9303L2 are specified high CMR and pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9303L is lead bending type (Gull-wing) for surface mounting. The PS9303L2 is lead bending type for long creepage distance (Gull-wing) for s | Small Outline Packages | PS9303L-E3-AX |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RLCGFB#X0
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RLCGFB#X0 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
813N322AKI-02LF
Renesas Electronics
|
1 | The 813N322I-02 device uses IDT's fourth generation FemtoClock® NG technology for optimal high clock frequency and low phase noise performance, combined with a low power consumption and high power supply noise rejection. The 813N322I-02 is a PLL based synchronous multiplier that is optimized for Ethernet to SONET/PDH clock jitter attenuation and frequency translation. The 813N322I-02 is a fully integrated Phase Locked loop utilizing a FemtoClock NG Digital VCXO that provides the low jitter, high frequency S | Quad Flat No-Lead | 813N322AKI-02LF |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RLAGFB#30
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RLAGFB#30 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
PS9513L3-V-AX
Renesas Electronics
|
1 | The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing an AlGaAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9513L1 is lead bending type for long creepage distance. The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for s | Small Outline Packages | PS9513L3-V-AX |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RFCGFP#X0
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RFCGFP#X0 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
5-103904-3
TE Connectivity
|
1 | Body Features: Primary Product Color Black | Configuration Features: PCB Mount Orientation Right Angle | Number of Positions 4 | Number of Rows 1 | Contact Features: Contact Mating Area Length 5.84 MM | PCB Contact Termination Area Plating Material Tin | PCB Contact Termination Area Plating Material Thickness 100 MICIN | PCB Contact Termination Area Plating Material Thickness 2.54 MICM | PCB Contact Termination Area Plating Material Finish Matte | Contact Mating Area Length .23 INCH | Contact Shape & Form S | Other | 5-103904-3 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RFCAFP#X0
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RFCAFP#X0 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
PS9513L3-AX
Renesas Electronics
|
1 | The PS9513, PS9513L1, PS9513L2 and PS9513L3 are optically coupled isolators containing an AlGaAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9513 is designed specifically for high common mode transient immunity (CMR) and low pulse width distortion with operating temperature. It is suitable for IPM drive. The PS9513L1 is lead bending type for long creepage distance. The PS9513L2 is lead bending type for long creepage distance (Gull-wing) for s | Small Outline Packages | PS9513L3-AX |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RFAGFP#70
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RFAGFP#70 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
5-794638-0
TE Connectivity
|
1 | Configuration Features: PCB Mount Orientation Vertical | Number of Positions 20 | Number of Rows 2 | Number of Power Positions 20 | Contact Features: Contact Retention Within Housing Without | Contact Mating Area Plating Material Thickness 30 MICIN | Contact Mating Area Plating Material Gold | Contact Mating Area Plating Material Thickness .76 MICM | Contact Current Rating (Max) 5 AMP | Multiple Contact Types Without | Contact Type Pin | PCB Contact Termination Area Plating Material Tin | Dimensions: Wire S | Other | 5-794638-0 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
5-794638-0
TE Connectivity
|
1 | Configuration Features: PCB Mount Orientation Vertical | Number of Positions 20 | Number of Rows 2 | Number of Power Positions 20 | Contact Features: Contact Retention Within Housing Without | Contact Mating Area Plating Material Thickness 30 MICIN | Contact Mating Area Plating Material Gold | Contact Mating Area Plating Material Thickness .76 MICM | Contact Current Rating (Max) 5 AMP | Multiple Contact Types Without | Contact Type Pin | PCB Contact Termination Area Plating Material Tin | Dimensions: Wire S | Other | 5-794638-0 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ISL9111AEH30Z-T7A
Renesas Electronics
|
1 | The ISL9111 and ISL9111A provide a power supply solution for single-cell, dual-cell, or three-cell alkaline, NiCd or NiMH battery-powered applications. The device has a typical 0.8V start-up voltage and is capable of supplying up to 5.25V output voltage. Both devices are guaranteed to supply 100mA from a single-cell input and 240mA from a dual-cell input when output is 3.3V. High 1.2MHz switching frequency allows for the use of tiny, low-profile inductors and ceramic capacitors to minimize the size of the s | SOT23 (6-Pin) | ISL9111AEH30Z-T7A |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RFAAFP#70
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RFAAFP#70 |
3
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
1 | AEC-Q101 Qualified\r\n• For Surface Mount Application in Order to Optimize Board Space\r\n• Low Profile Package\r\n• Low Inductance\r\n• Excellent Clamping Capability\r\n• Fast Response Time: Typical Less Than 1.0ps From 0 Volts to VBR\r\nMinimum\r\n• For Bidirectional Devices Add “C” To The Suffix of\r\nThe Part Number: i.e.SMCJ1.5KE12CAHE3 for 5% Tolerance\r\n• Halogen Free. "Green" Device (Note 1)\r\n• Moisture Sensitivity Level 1\r\n• Epoxy Meets UL 94 V-0 Flammability Rating\r\n• Lead Free Finish/RoHS Compliant (Note2) ("P" S | Diodes Moulded Non Polarised | SMCJ1.5KE75CAHE3-TP |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
R5F10RB8AFP#X0
Renesas Electronics
|
1 | RL78/L12 microcontrollers have a built-in segment LCD driver. Three LCD driving voltage generation methods (external resistance division, capacitive split, and internal voltage boost) are supported, corresponding to a variety of segment LCD panels. They realize low current consumptionNote 1: external resistance division: 1.60 μANote 2, internal voltage boost: 1.19 μA, and capacitive split: 0.68 µA. With a lineup of 32 to 64-pin products supporting up to 280 segments, these microcontrollers are perfect for s | Quad Flat Packages | R5F10RB8AFP#X0 |
2
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||