Showing 25 of 709 results
Filter by Manufacturer
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action |
---|
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
F1350NBGI8
Renesas Electronics
|
1 | The F1350 is a Digital Pre-Distortion Demodulator for PA linearization typically used in base stations to significantly improve the ACLR and/or power consumption of the full TX system in base stations transmitter applications. | F1350NBGI8 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F4482EVS-2P1
Renesas Electronics
|
1 | Evaluation System for the F4482 DIFF-In / SE-Out Quad Path TX DVGA specifically tuned for the 1700MHz to 2800MHz frequency band.For more information, please see the Evaluation Kit section of the datasheet. | F4482EVS-2P1 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1300NBGI
Renesas Electronics
|
1 | The F1300 is a Digital Pre-Distortion Demodulator for PA linearization typically used in base stations to significantly improve the ACLR and/or power consumption of the full TX system in base stations transmitter applications. | F1300NBGI |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1325NBGI8
Renesas Electronics
|
1 | The F1325 is a Digital Pre-Distortion Demodulator for PA linearization typically used in base stations to significantly improve the ACLR and/or power consumption of the full TX system in base stations transmitter applications. | F1325NBGI8 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MAX4805CTJ+
Analog Devices
|
1 | High Density/8 Channels Per Package I/O Protection for TX Burst Up to ±100V Very Fast Recovery Time After TX Burst 1.5µs (typ) OVP for Signals Greater Than ±2.7V Extremely Low Power Dissipation 8mW/ch (typ) 65Ω (typ) Low-Signal Output Impedance 44MHz -3dB Bandwidth (typ) Voltage Gain 6dB (MAX4805) (typ), 9dB (MAX4805A) (typ) Low Voltage Noise 2.2nV/ (typ) (MAX4805) Low Voltage Noise 2.2nV/ (typ) (MAX4805A) Low Current Noise 2.0pA/ (typ) (MAX4805) Low Current Noise 1.7pA/ (typ) (MAX4 | MAX4805CTJ+ |
1
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1375NBGI8
Renesas Electronics
|
1 | The F1375 is a Digital Pre-Distortion Demodulator for PA linearization typically used in base stations to significantly improve the ACLR and/or power consumption of the full TX system in base stations transmitter applications. | F1375NBGI8 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1350NBGI
Renesas Electronics
|
1 | The F1350 is a Digital Pre-Distortion Demodulator for PA linearization typically used in base stations to significantly improve the ACLR and/or power consumption of the full TX system in base stations transmitter applications. | F1350NBGI |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1300NBGI8
Renesas Electronics
|
1 | The F1300 is a Digital Pre-Distortion Demodulator for PA linearization typically used in base stations to significantly improve the ACLR and/or power consumption of the full TX system in base stations transmitter applications. | F1300NBGI8 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1385NBGI8
Renesas Electronics
|
1 | The F1385 is a Digital Pre-Distortion Demodulator for PA linearization typically used in base stations to significantly improve the ACLR and/or power consumption of the full TX system in base stations transmitter applications. | F1385NBGI8 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
81006AKLFT
Renesas Electronics
|
1 | The 81006 is a high performance, low jitter/ low phase noise VCXO and is a member of the family of high performance clock solutions from IDT. The 81006 works in conjunction with a pullable crystal to generate an output clock over the range of 12MHz - 31.25MHz and has 6 LVCMOS outputs, effectively integrating a fanout buffer function.The frequency of the VCXO is adjusted by the VC control voltage input. The output range is ±100ppm around the nominal crystal frequency. The VC control voltage range is 0 - VDD. | 81006AKLFT |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
81006AKILFT
Renesas Electronics
|
1 | The 81006I is a high performance, low jitter/ low phase noise VCXO and is a member of the family of high performance clock solutions from IDT. The 81006I works in conjunction with a pullable crystal to generate an output clock over the range of 12MHz - 31.25MHz and has 6 LVCMOS outputs, effectively integrating a fanout buffer function.The frequency of the VCXO is adjusted by the VC control voltage input. The output range is ±100ppm around the nominal crystal frequency. The VC control voltage range is 0 - VD | 81006AKILFT |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
81006AKILF
Renesas Electronics
|
1 | The 81006I is a high performance, low jitter/ low phase noise VCXO and is a member of the family of high performance clock solutions from IDT. The 81006I works in conjunction with a pullable crystal to generate an output clock over the range of 12MHz - 31.25MHz and has 6 LVCMOS outputs, effectively integrating a fanout buffer function.The frequency of the VCXO is adjusted by the VC control voltage input. The output range is ±100ppm around the nominal crystal frequency. The VC control voltage range is 0 - VD | 81006AKILF |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MS85001-TR
Renesas Electronics
|
1 | The MS85001 is a highly-integrated monolithic ultra-wideband (UWB) motion detector radio-frequency IC (RFIC) that integrates the transmit output amplifier and the full receive path. The transmit power level and the detection range are adjustable.The radar is a homodyne configuration for simplicity and small size. An integrated RF oscillator provides the carrier frequency for the Tx pulse and the local oscillator (LO) for the receive mixer. The homodyne radar architecture helps to reduce the power consumptio | MS85001-TR |
1
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1455EVBK
Renesas Electronics
|
1 | The F1455EVBK is a fully populated evaluation board which allows the customer to easily evaluate the F1455 TX RF Digital Variable Gain Amplifier. Attenuation is set using SPI.The F1455EVS is a complete hardware and software solution that allows customers to digitally control the F1455EVBK with the USB output on a computer. The kit includes the F1455EVBK board, as well as a USB Digital Control Board and interface cables. The software, guides , and instructional videos are available for download / viewing on | F1455EVBK |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MS85001
Renesas Electronics
|
1 | The MS85001 is a highly-integrated monolithic ultra-wideband (UWB) motion detector radio-frequency IC (RFIC) that integrates the transmit output amplifier and the full receive path. The transmit power level and the detection range are adjustable.The radar is a homodyne configuration for simplicity and small size. An integrated RF oscillator provides the carrier frequency for the Tx pulse and the local oscillator (LO) for the receive mixer. The homodyne radar architecture helps to reduce the power consumptio | MS85001 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1451EVBK
Renesas Electronics
|
1 | The F1451EVBK is a fully populated evaluation board that allows the customer to easily evaluate the F1451 TX RF Digital Variable Gain Amplifier. Attenuation is set using SPI.The F1451EVSK is a complete hardware and software solution that allows customers to digitally control the F1451EVBK with the USB output on a computer. The kit includes the F1451EVBK board, as well as a USB Digital Control Board, and interface cables. The software, guides , and instructional videos are available for download/viewing on t | F1451EVBK |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1455EVS
Renesas Electronics
|
1 | The F1455EVBK is a fully populated evaluation board which allows the customer to easily evaluate the F1455 TX RF Digital Variable Gain Amplifier. Attenuation is set using SPI.The F1455EVS is a complete hardware and software solution that allows customers to digitally control the F1455EVBK with the USB output on a computer. The kit includes the F1455EVBK board, as well as a USB Digital Control Board and interface cables. The software, guides , and instructional videos are available for download / viewing on | F1455EVS |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MAX32666GXMBL+
Analog Devices
|
1 | High-Efficiency Microcontroller and Audio DSP for Wearable and Hearable Devices Arm Cortex-M4 with FPU Up to 96MHz Optional Second Arm Cortex-M4 with FPU Optimized for Data Processing Low-Power 7.3728MHz System Clock Option 1MB Flash, Organized into Dual Banks 2 x 512KB 560KB SRAM; 3 x 16KB Cache Bluetooth 5 Low Energy Radio 1Mbps and 2Mbps Data Throughput Long Range (125kbps and 500kbps) Advertising Extension Rx Sensitivity: -95dbm; Tx Power Up to +4.5dbm On-Chip Matching with Single-Ended Antenna Port Pow | BGA | MAX32666GXMBL+ |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MAX32666GXMBL+T
Analog Devices
|
1 | High-Efficiency Microcontroller and Audio DSP for Wearable and Hearable Devices Arm Cortex-M4 with FPU Up to 96MHz Optional Second Arm Cortex-M4 with FPU Optimized for Data Processing Low-Power 7.3728MHz System Clock Option 1MB Flash, Organized into Dual Banks 2 x 512KB 560KB SRAM; 3 x 16KB Cache Bluetooth 5 Low Energy Radio 1Mbps and 2Mbps Data Throughput Long Range (125kbps and 500kbps) Advertising Extension Rx Sensitivity: -95dbm; Tx Power Up to +4.5dbm On-Chip Matching with Single-Ended Antenna Port Pow | BGA | MAX32666GXMBL+T |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MAX3956ETJ+
Analog Devices
|
1 | Low Power ConsumptionEnables < 0.8W Total SFP+ Module Power Dissipation380mW Typical IC Power Dissipation at 3.3V (ILD_MOD = 45mA, IBIAS = 45mA)FlexibilityMultirate up to 11.3Gbps (NRZ) Operation with Rate Select for 1.25Gbps to 4.25Gbps OperationProgrammable Laser-Diode Modulation Current from 10mA to 85mAProgrammable Tx Input Equalization and Rx Output DeemphasisSafety and MonitoringIntegrated Eye Safety Features with Maskable Fault and Interrupt Signal GenerationAnalog Monitors with Integrated 12-Bit | MAX3956ETJ+ |
1
|
Download Model | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
P9261-3C-CRB
Renesas Electronics
|
1 | The P9261-3C-CRB is a turnkey 15 Watt, Qi-compliant wireless power transmitter triple coil reference kit for fast prototyping and design integration. This will enable customers to have faster time to market with a WPC Qi qualified MP-A13 three coils solution. The kit consists of an easy-to-use 3-coil WPC Tx type reference board and 15W EPP receiver board, P9221-R-EVK and comprehensive design collateral that significantly eases design-in effort and minimizes time-to-market.An associated layout module enables | P9261-3C-CRB |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
VLX2000ABG
Renesas Electronics
|
1 | The VLX2000 is DisplayPort1.1a and HDMI1.3 compliant DP to HDMI converter. It has one DP Rx port and one HDMI output port. After initialization, the VLX2000 will retrieve the EDID information from the monitor connected on its Tx port and present it on Rx port and trigger HPD. In addition, the VLX2000 is protected with the highest security built-in circuitry fully compliant with HDCP v1.3. | VLX2000ABG |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
VLX2000ABG8
Renesas Electronics
|
1 | The VLX2000 is DisplayPort1.1a and HDMI1.3 compliant DP to HDMI converter. It has one DP Rx port and one HDMI output port. After initialization, the VLX2000 will retrieve the EDID information from the monitor connected on its Tx port and present it on Rx port and trigger HPD. In addition, the VLX2000 is protected with the highest security built-in circuitry fully compliant with HDCP v1.3. | VLX2000ABG8 |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F4482LKGI
Renesas Electronics
|
1 | The F4482 is a 1300MHz to 2800MHz Quad Path TX DVGA outfitted with 100Ω differential inputs and 50Ω single-ended outputs. The device is part of a complete family of VGAs targeting FDD and TDD applications within the 400MHz to 4200MHz frequency range.Using a single 3.3V power supply and only 485mA of ICC, the F4482 provides four independent transmit paths, each with 27.5dB typical maximum gain, +36.8dBm OIP3, +16.5dBm output P1dB, and 5.7dB NF. Each channel includes a glitch-free digital step attenuator that | F4482LKGI |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1451EVSK
Renesas Electronics
|
1 | The F1451EVBK is a fully populated evaluation board that allows the customer to easily evaluate the F1451 TX RF Digital Variable Gain Amplifier. Attenuation is set using SPI.The F1451EVSK is a complete hardware and software solution that allows customers to digitally control the F1451EVBK with the USB output on a computer. The kit includes the F1451EVBK board, as well as a USB Digital Control Board, and interface cables. The software, guides , and instructional videos are available for download/viewing on t | F1451EVSK |
0
|
Build or Request | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||