Showing 25 of 1059 results
Filter by Manufacturer
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action |
---|
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
EFR32FG25B221F1920IM56-B
Silicon Labs
|
1 | 32-bit ARM® Cortex®-M33 core with 97.5\r\nMHz maximum operating frequency\r\n• Up to 1920 kB of flash and 512 kB of RAM\r\n• Wi-SUN Multi-rate OFDM, FSK, and OQPSK modulations\r\n• Integrated PA with up to 16 dBm (SubGHz) TX power\r\n• Robust peripheral set and up to 37 GPIO\r\n• Operation up to 125 °C | Quad Flat No-Lead | EFR32FG25B221F1920IM56-B |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
L1T2-5070000000000
Lumileds
|
1 | Lumileds L1T2-5070000000000, LUXEON TX Series White High-Power LED, 5000K, 3737, Dome Lens SMD Package | Other | L1T2-5070000000000 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1456NKGK8
Renesas Electronics
|
1 | The F1456 is a High-Gain/High-Linearity 2100MHz to 2950MHz TX Variable Gain Amplifier used in transmitter applications. The F1456 TX VGA provides 32.1dB maximum gain with +38dBm OIP3 and 3.9dB noise figure. Up to 31.5dB gain control is achieved using the combination of a digital step attenuator (DSA) plus KLIN™ RF variable gain amplifier gain adjustment. This device uses a single 5V supply and 215mA of ICC. This device is packaged in a 6 × 6 mm, 28-QFN with 50Ω single-ended RF input and RF output impedances | Quad Flat No-Lead | F1456NKGK8 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EFR32MG27C140F768IM32-BR
Silicon Labs
|
1 | • Low Power Wireless System-on-Chip\r\n• High Performance 32-bit 76.8 MHz MHz ARM Cortex®-M33\r\nwith DSP instruction and floating-point unit for efficient signal processing\r\n• 768 kB flash program memory\r\n• 64 kB RAM data memory\r\n• 2.4 GHz radio operation\r\n• Radio Performance\r\n• -102.2 dBm sensitivity @ 250 kbps O-QPSK DSSS\r\n• -106.9 dBm sensitivity @ 125 kbps GFSK\r\n• -99.2 dBm sensitivity @ 1 Mbit/s GFSK\r\n• -96.3 dBm sensitivity @ 2 Mbit/s GFSK\r\n• TX power up to 8 dBm\r\n• Low System Energy Consumption\r\n• 4.0 m | Quad Flat No-Lead | EFR32MG27C140F768IM32-BR |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
DS25CP102TSQ/NOPB
Texas Instruments
|
1 | 3.125 Gbps 2X2 LVDS Crosspoint Switch w/ TX Pre-Emphasis and RX Equalization | Quad Flat No-Lead | DS25CP102TSQ/NOPB |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
HFBR-1541ETZ
Avago Technologies
|
1 | Fibre Optic Transmitters, Receivers, Transceivers Versatile Link Tiltd 5MBd Tx RoHS | Other | HFBR-1541ETZ |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ATA8743C-PXQW-1
Microchip
|
1 | RF Microcontrollers - MCU Embedded C incl RF Tx for 868 MHz with UHF ASK/FSK Transmitter | Quad Flat No-Lead | ATA8743C-PXQW-1 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
WT11U-A-AI56
Silicon Labs
|
1 | Bluetooth Modules (802.15.1) AI5 : iWRAP 5.6. Bluetooth 2.1+EDR module with antenna. Class 1, iWRAP 5.6, 17 dBm TX power. FP Q4/16. IP Q3/16 | Other | WT11U-A-AI56 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL32614EFHZ-T
Renesas Electronics
|
1 | The ISL32613E and ISL32614E are ±16. 5kV HBM ESD protected (7kV IEC61000 contact), 1. 8V powered, single transmitters for differential communication. These drivers have very low bus currents (±40µA), so they present less than a 1/8 unit load to the bus. The low bus currents allow more than 256 transmitters on the network without violating the RS-485 specification’s 32 unit load maximum and without using repeaters. Hot plug circuitry ensures that the Tx outputs remain in a high impedance state while the powe | SOT23 (6-Pin) | ISL32614EFHZ-T |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL4489EIBZ-T
Renesas Electronics
|
1 | The ISL4489E and ISL4491E are ESD protected, “fractional”Unit Load (UL), BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output and receiver input is protected against ±15kV ESD strikes without latch-up. Unlike competitive versions, these devices are specified for 10% tolerance supplies (4. 5V to 5. 5V). The Rx inputs and Tx outputs present a 1/8 unit load to the RS-485 bus, which allows a total of 256 transmitters and receivers | Small Outline Packages | ISL4489EIBZ-T |
2
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL4491EIBZ-T
Renesas Electronics
|
1 | The ISL4489E and ISL4491E are ESD protected, “fractional”Unit Load (UL), BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output and receiver input is protected against ±15kV ESD strikes without latch-up. Unlike competitive versions, these devices are specified for 10% tolerance supplies (4. 5V to 5. 5V). The Rx inputs and Tx outputs present a 1/8 unit load to the RS-485 bus, which allows a total of 256 transmitters and receivers | Small Outline Packages | ISL4491EIBZ-T |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL33337EIRZ-T
Renesas Electronics
|
1 | The ISL33334E, ISL33337E are two port interface ICs where port 1 is configured as a dual (2 Tx, 2 Rx) RS-232 transceiver and port 2 is a single RS-485/RS-422 transceiver. The on-board charge pump generates RS-232 compliant ±5V Tx output levels from a single VCC supply as low as 3. 15V. The transceivers are RS-232 compliant, with the Rx inputs handling up to ±25V. The port 2 transceiver supports both the RS-485 and RS-422 differential communication standards. The receiver features full fail-safe operation, s | Quad Flat No-Lead | ISL33337EIRZ-T |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL33337EIRZ-T7A
Renesas Electronics
|
1 | The ISL33334E, ISL33337E are two port interface ICs where port 1 is configured as a dual (2 Tx, 2 Rx) RS-232 transceiver and port 2 is a single RS-485/RS-422 transceiver. The on-board charge pump generates RS-232 compliant ±5V Tx output levels from a single VCC supply as low as 3. 15V. The transceivers are RS-232 compliant, with the Rx inputs handling up to ±25V. The port 2 transceiver supports both the RS-485 and RS-422 differential communication standards. The receiver features full fail-safe operation, s | Quad Flat No-Lead | ISL33337EIRZ-T7A |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL3330IAZ-T7A
Renesas Electronics
|
1 | These devices are BiCMOS interface ICs that are user configured as either a single RS-422/RS-485 differential transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. In RS-232 mode, the on-board charge pump generates RS-232 compliant ±5V Tx output levels, from a supply as low as 3. 15V. Four small 0. 1µF capacitors are required for the charge pump. The transceivers are RS-232 compliant, with the Rx inputs handling up to ±25V. In RS-485 mode, the transceivers support both the RS-485 and RS-422 differentia | Small Outline Packages | ISL3330IAZ-T7A |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
F1320NBGI
Renesas Electronics
|
1 | The IDT F1320 is a highly linear complex IF digital pre-distortion (DPD) demodulator with built-in digital step attenuator (DSA) and single-pole-double-throw switches (SP2Ts). It receives the signal coming out of the PA so that the I&Q data at Baseband can be pre-distorted before being sent to the Tx DAC to counteract the distortion inherent in the downstream PA. The signal coupled from the PA is adjusted via a DSA to a lower level and then sub-sampled at an IF frequency of ~200 MHz which necessitates the | Quad Flat No-Lead | F1320NBGI |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL41334IRZ-T7A
Renesas Electronics
|
1 | The ISL81334 and ISL41334 are two-port interface ICs in which each port can be independently configured as a single RS-485, RS-422 transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. With both ports set to the same mode, two RS-485, RS-422 transceivers, or four RS-232 transceivers are available. If either port is in RS-232 mode, the onboard charge pump generates RS-232 compliant ±5V Tx output levels from a single VCC supply as low as 4.5V. Four small 0.1µF capacitors are required for the charge pump. | Quad Flat No-Lead | ISL41334IRZ-T7A |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL3330IAZ
Renesas Electronics
|
1 | These devices are BiCMOS interface ICs that are user configured as either a single RS-422/RS-485 differential transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. In RS-232 mode, the on-board charge pump generates RS-232 compliant ±5V Tx output levels, from a supply as low as 3. 15V. Four small 0. 1µF capacitors are required for the charge pump. The transceivers are RS-232 compliant, with the Rx inputs handling up to ±25V. In RS-485 mode, the transceivers support both the RS-485 and RS-422 differentia | Small Outline Packages | ISL3330IAZ |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL3331IRZ
Renesas Electronics
|
1 | This device is a BiCMOS interface IC that is user-configured as either a single RS-422/RS-485 differential transceiver or as a dual (2 Tx, 2 Rx) RS-232 transceiver. In RS-232 mode, the on-board charge pump generates RS-232 compliant ±5V Tx output levels, from a supply as low as 3.15V. Four small 0.1µF capacitors are required for the charge pump. The transceivers are RS-232 compliant, with the Rx inputs handling up to ±25V. In RS-485 mode, the transceivers support both the RS-485 and RS-422 differential comm | Quad Flat No-Lead | ISL3331IRZ |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
CMX983Q1
CML Micro
|
1 | -40 +85 °C RF Front End Rx and Tx Channel ADC/ DAC Converters, Two Frac-N Synthesisers and Auxilliary Functions | Quad Flat No-Lead | CMX983Q1 |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EFR32FG28B310F1024IM68-AR
Silicon Labs
|
1 | • Low Power Wireless System-on-Chip\r\n• High Performance 32-bit 78 MHz ARM Cortex®-M33 with\r\nDSP instruction and floating-point unit for efficient signal\r\nprocessing\r\n• Up to 1024 kB flash program memory\r\n• Up to 256 kB RAM data memory\r\n• Sub-GHz radio operation with TX power up to +20 dBm\r\n• 2.4 GHz BLE radio operation with TX power up to +10 dBm\r\n• Matrix Vector Processor for AI/ML acceleration\r\n• Low Energy Consumption\r\n• 4.4 mA RX current at 920 MHz (400 kbps 4-FSK)\r\n• 4.0 mA RX current at 915 MHz (4.8 k | Quad Flat No-Lead | EFR32FG28B310F1024IM68-AR |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
AM-RT14-433P
RF SOLUTIONS
|
1 | AM TX MODULE, 9.6KBPS, 433.92MHZ; RF Modulation:AM; Data Rate Max:9.6Kbps; Frequency:433.92MHz; Sensitivity dBm:-; Supply Voltage Min:2V; Supply Voltage Max:9V; Supply Current:8mA; RF Transmitter Applications:Security Sys, Car RoHS Compliant: Yes | Other | AM-RT14-433P |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MAX3030ECUE+T
Analog Devices
|
1 | Recommendation\r\n♦ ±15kV ESD Protection on Tx Outputs\r\n♦ Hot-Swap Functionality\r\n♦ Guaranteed 20Mbps Data Rate (MAX3030E,\r\nMAX3032E)\r\n♦ Slew-Rate-Controlled 2Mbps Data Rate\r\n(MAX3031E, MAX3033E)\r\n♦ Available in 16-Pin TSSOP and Narrow SO\r\nPackages\r\n♦ Low-Power Design (<330µW, VCC = 3.3V Static)\r\n♦ +3.3V Operation\r\n♦ Industry-Standard Pinout\r\n♦ Thermal Shutdown | Small Outline Packages | MAX3030ECUE+T |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
MAX4805ACTJ+
Analog Devices
|
1 | High Density/8 Channels Per Package I/O Protection for TX Burst Up to ±100V Very Fast Recovery Time After TX Burst 1.5µs (typ) OVP for Signals Greater Than ±2.7V Extremely Low Power Dissipation 8mW/ch (typ) 65Ω (typ) Low-Signal Output Impedance 44MHz -3dB Bandwidth (typ) Voltage Gain 6dB (MAX4805) (typ), 9dB (MAX4805A) (typ) Low Voltage Noise 2.2nV/ (typ) (MAX4805) Low Voltage Noise 2.2nV/ (typ) (MAX4805A) Low Current Noise 2.0pA/ (typ) (MAX4805) Low Current Noise 1.7pA/ (typ) (MAX4 | Quad Flat No-Lead | MAX4805ACTJ+ |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL8489EIBZ-T
Renesas Electronics
|
1 | The ISL8488E, ISL8489E, ISL8490E, ISL8491E devices are ESD protected, BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output and receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive versions, these Intersil devices are specified for 10% tolerance supplies (4. 5V to 5. 5V). These devices are configured for full duplex (separate Rx input and Tx output pins) applications, so they are ideal for | Small Outline Packages | ISL8489EIBZ-T |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ISL8491EIBZ-T
Renesas Electronics
|
1 | The ISL8488E, ISL8489E, ISL8490E, ISL8491E devices are ESD protected, BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. Each driver output and receiver input is protected against ±15kV ESD strikes, without latch-up. Unlike competitive versions, these Intersil devices are specified for 10% tolerance supplies (4. 5V to 5. 5V). These devices are configured for full duplex (separate Rx input and Tx output pins) applications, so they are ideal for | Small Outline Packages | ISL8491EIBZ-T |
3
|
Download Model | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||