Showing 25 of 317 results
Filter by Manufacturer
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action |
---|
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
DP11H3015A30S
TE Connectivity
|
1 | Body Features: Shaft Style Slotted | Product Orientation Horizontal | Configuration Features: Sections Single | Adjustment Method Spindle | Number of Detents 30 | Adjustment Location Side | Number of Pulses 15 | Dimensions: Passive Component Dimensions 13.75 x 11.7 x 6.3 MM | Electrical Characteristics: Passive Component Switch Current Rating 3 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Encoder Type Contact Encoder | Includes Switch Yes | Rotary Encoder Switch Type Pu | DP11H3015A30S |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DP11SV3015B30S
TE Connectivity
|
1 | Body Features: Product Orientation Vertical | Shaft Style Slotted | Configuration Features: Adjustment Method Spindle | Adjustment Location Top | Number of Detents 30 | Number of Pulses 15 | Dimensions: Passive Component Dimensions 13.75 x 11.7 x 6.6 MM | Electrical Characteristics: Passive Component Switch Current Rating 3 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Passive Component Option Includes Switch | Encoder Type Contact Encoder | Rotary Encoder Switch Type Pu | DP11SV3015B30S |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ISL78264ARZ-T
Renesas Electronics
|
1 | The ISL78264 is a dual buck controller that can operate across a wide VIN range of 3.75V to 42V. It is designed to support wide duty-cycle operation for switching frequencies from 200kHz up to 2.2MHz. To mitigate EMI, it supports synchronization to an external clock or programmable spread spectrum clocking. Its current-mode modulator is ideally suited to tolerate severe line transients. Also, the ISL78264 supports dropout operation and low 25ns on-time to operate through automotive cranking and load dump pu | ISL78264ARZ-T |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
ACW0219-6.00-20(BP)
TE Connectivity
|
1 | Body Features: Case Material PBT | Bushing Style Threaded | Actuator Profile Flush | Configuration Features: Tactile No | Support Bracket Without | Configuration (Pole-Throw) Single Pole - Single Throw | Snap Action Without | ESD Grounding Terminal Without | Detent Style Audible | Number of Actuators Single | Operating Function Momentary | Contact Features: Switch Contact Plating Material Silver | Contact Base Material Copper | Push Button Switch Contact Current Rating 3 AMP | Electrical Characteristics: Pu | ACW0219-6.00-20(BP) |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-02-AO
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-02-AO |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-01-BA
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-01-BA |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DP11H3015A15S
TE Connectivity
|
1 | Body Features: Product Orientation Horizontal | Shaft Style Slotted | Configuration Features: Adjustment Location Side | Sections Single | Number of Pulses 15 | Number of Detents 30 | Adjustment Method Spindle | Dimensions: Passive Component Dimensions 13.75 x 11.7 x 6.3 MM | Electrical Characteristics: Passive Component Switch Current Rating 3 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Includes Switch Yes | Encoder Type Contact Encoder | Rotary Encoder Switch Type Pu | DP11H3015A15S |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-02-ALT
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-02-ALT |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
AV1911RA24Q04
TE Connectivity
|
1 | Body Features: Bushing Style Threaded | Case Material PBT | Actuator Profile Flush | Configuration Features: Configuration (Pole-Throw) Double Pole - Single Throw | Detent Style Audible | Tactile No | Number of Actuators Single | Support Bracket Without | Operating Function Momentary | Snap Action Without | ESD Grounding Terminal Without | Contact Features: Switch Contact Plating Material Silver | Contact Base Material Copper | Push Button Switch Contact Current Rating 3 AMP | Electrical Characteristics: Pu | AV1911RA24Q04 |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DPL12SV2424A18.5F2
TE Connectivity
|
1 | Body Features: Shaft Style Flatted | Product Orientation Vertical | Configuration Features: Adjustment Method Spindle | Number of Pulses 24 | Number of Detents 24 | Adjustment Location Top | Dimensions: Passive Component Dimensions 14.5 x 12.4 x 7 MM | Electrical Characteristics: Passive Component Switch Current Rating .01 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Passive Component Option Includes Switch | Encoder Type LED Encoder | Rotary Encoder Switch Type Push Pu | DPL12SV2424A18.5F2 |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DP11SV3015B15F
TE Connectivity
|
1 | Body Features: Product Orientation Vertical | Shaft Style Flatted | Configuration Features: Adjustment Location Top | Adjustment Method Spindle | Number of Pulses 15 | Number of Detents 30 | Dimensions: Passive Component Dimensions 13.75 x 11.7 x 6.6 MM | Electrical Characteristics: Passive Component Switch Current Rating 3 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Passive Component Option Includes Switch | Encoder Type Contact Encoder | Rotary Encoder Switch Type Pu | DP11SV3015B15F |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DP11SV3015A20S
TE Connectivity
|
1 | Body Features: Shaft Style Slotted | Product Orientation Vertical | Configuration Features: Adjustment Method Spindle | Number of Pulses 15 | Adjustment Location Top | Number of Detents 30 | Dimensions: Passive Component Dimensions 13.75 x 11.7 x 6.6 MM | Electrical Characteristics: Passive Component Switch Current Rating 3 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Encoder Type Contact Encoder | Passive Component Option Includes Switch | Rotary Encoder Switch Type Pu | DP11SV3015A20S |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-02-AI
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-02-AI |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DP11SV2020A25K
TE Connectivity
|
1 | Body Features: Product Orientation Vertical | Shaft Style Knurled | Configuration Features: Number of Pulses 20 | Adjustment Method Spindle | Number of Detents 20 | Adjustment Location Top | Dimensions: Passive Component Dimensions 13.75 x 11.7 x 6.6 MM | Electrical Characteristics: Passive Component Switch Current Rating 3 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Passive Component Option Includes Switch | Encoder Type Contact Encoder | Rotary Encoder Switch Type Pu | DP11SV2020A25K |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DP11SV3015A25F
TE Connectivity
|
1 | Body Features: Shaft Style Flatted | Product Orientation Vertical | Configuration Features: Number of Pulses 15 | Adjustment Location Top | Adjustment Method Spindle | Number of Detents 30 | Dimensions: Passive Component Dimensions 13.75 x 11.7 x 6.6 MM | Electrical Characteristics: Passive Component Switch Current Rating 3 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Passive Component Option Includes Switch | Encoder Type Contact Encoder | Rotary Encoder Switch Type Pu | DP11SV3015A25F |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DPL12SV2424A26F1
TE Connectivity
|
1 | Body Features: Shaft Style Flatted | Product Orientation Vertical | Configuration Features: Adjustment Method Spindle | Number of Pulses 24 | Number of Detents 24 | Adjustment Location Top | Dimensions: Passive Component Dimensions 14.5 x 12.4 x 7 MM | Electrical Characteristics: Passive Component Switch Current Rating .01 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Encoder Type LED Encoder | Passive Component Option Includes Switch | Rotary Encoder Switch Type Push Pu | DPL12SV2424A26F1 |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-01-BL
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-01-BL |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
DP11SV2020B30F
TE Connectivity
|
1 | Body Features: Shaft Style Flatted | Product Orientation Vertical | Configuration Features: Number of Pulses 20 | Number of Detents 20 | Adjustment Method Spindle | Adjustment Location Top | Dimensions: Passive Component Dimensions 13.75 x 11.7 x 6.6 MM | Electrical Characteristics: Passive Component Switch Current Rating 3 AMP | Operation/Application: Operating Speed (Max) 60 RPM | Product Type Features: Passive Component Option Includes Switch | Encoder Type Contact Encoder | Rotary Encoder Switch Type Pu | DP11SV2020B30F |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-01-BET
Renesas Electronics
|
0 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-01-BET |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-02-AM
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-02-AM |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-02-AD
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-02-AD |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-01-BAT
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-01-BAT |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-02-AIT
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-02-AIT |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-02-AK
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-02-AK |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
M675-02-AP
Renesas Electronics
|
1 | The M675 is a VCSO (Voltage Controlled SAW Oscillator) frequency source for low-jitter clock generation. An integrated SAW (surface acoustic wave) delay line implements the high-Q VCO (voltage controlled oscillator) function, which results in low output phase noise and very low jitter. The M675-01 is available in a range of center frequencies from 125 to 175 MHz. The M675-02 provides 500 to 700 MHz. Guaranteed minimum pull-range of ±100 ppm meets GbE requirements. (It also fully satisfies ±50 ppm minimum pu | M675-02-AP |
0
|
Build or Request | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||