Part Image

71V3577S75PFG - Renesas Electronics

Description: The 71V3577 3.3V CMOS SRAM is organized as 128K x 36. The 71V3577 SRAM contains write, data, address and control registers. The burst mode feature offers the highest level of performance to the system designer, as it can provide four cycles of data for a single address presented to the SRAM.

Download 71V3577S75PFG Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
71V3577S75PFG - Renesas Electronics PCB footprint - Quad Flat Packages - Quad Flat Packages - 100-Pin Plastic Thin Quad Flatpack (PKG100)
click to zoom
3D Models
71V3577S75PFG - Renesas Electronics  - 3D model - Quad Flat Packages - 100-Pin Plastic Thin Quad Flatpack (PKG100)
click to zoom

71V3577S75PFG Details

  • Manufacturer Part Number:

    71V3577S75PFG

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    TQFP

  • Pin Count:

    100

  • Manufacturer Package Code:

    PKG100

  • ECCN Code:

    3A991.b.2.a

  • HTS Code:

    8542.32.00.41

  • Factory Lead Time:

    111 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Access Time-Max:

    7.5 ns

  • Additional Feature:

    FLOW THROUGH ARCHITECTURE

  • Clock Frequency-Max (fCLK):

    117 MHz

  • I/O Type:

    COMMON

  • JESD-30 Code:

    R-PQFP-G100

  • JESD-609 Code:

    e3

  • Length:

    20 mm

  • Memory Density:

    4718592 bit

  • Memory IC Type:

    STANDARD SRAM

  • Memory Width:

    36

  • Moisture Sensitivity Level:

    3

  • Number of Functions:

    1

  • Number of Ports:

    1

  • Number of Terminals:

    100

  • Number of Words:

    131072 words

  • Number of Words Code:

    128000

  • Operating Mode:

    SYNCHRONOUS

  • Operating Temperature-Max:

    70 °C

  • Organization:

    128KX36

  • Output Characteristics:

    3-STATE

  • Output Enable:

    YES

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LQFP

  • Package Equivalence Code:

    QFP100,.63X.87

  • Package Shape:

    RECTANGULAR

  • Package Style:

    FLATPACK, LOW PROFILE

  • Packing Method:

    TRAY

  • Parallel/Serial:

    PARALLEL

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Reverse Pinout:

    NO

  • Seated Height-Max:

    1.6 mm

  • Standby Current-Max:

    0.03 A

  • Standby Voltage-Min:

    3.14 V

  • Supply Current-Max:

    0.255 mA

  • Supply Voltage-Max (Vsup):

    3.465 V

  • Supply Voltage-Min (Vsup):

    3.135 V

  • Supply Voltage-Nom (Vsup):

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    14 mm

71V3577S75PFG Frequently Asked Questions (FAQs)

  • Renesas provides a recommended PCB layout guide in their application note (Renesas Document No. AP-5153) which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize noise.
  • The 71V3577S75PFG has a thermal pad on the bottom of the package, which should be connected to a thermal plane on the PCB to dissipate heat. Additionally, Renesas recommends using thermal vias and a heat sink to further improve thermal management.
  • The maximum clock frequency for the 71V3577S75PFG is 100 MHz, but it can be overclocked up to 133 MHz with reduced voltage and temperature derating. However, this is not recommended for production designs and should only be done for evaluation purposes.
  • The 71V3577S75PFG has a built-in POR circuit, but it requires an external resistor and capacitor to set the reset timing. Renesas provides a POR circuit design guide in their application note (Renesas Document No. AP-5154) which includes recommended component values and layout guidelines.
  • Renesas recommends using a low-dropout linear regulator (LDO) or a switching regulator with a high power supply rejection ratio (PSRR) to ensure stable voltage supply to the 71V3577S75PFG. A list of recommended VRMs can be found in the Renesas document (Renesas Document No. AP-5155).

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

71V3577S75PFG Overview

Use the download button to access the 71V3577S75PFG schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like 71V35, or try a keyword search, such as SRAMs

Parts related to 71V3577S75PFG

Showing 0 results

71V3577S75PFG Alternates

Showing results

Image Part Number Model
Part Image 71V3577S75PFG Integrated Device Technology Inc

Cache SRAM, 128KX36, 7.5ns, CMOS, PQFP100

Part Image 71V3577YS75PF8 Integrated Device Technology Inc

Cache SRAM, 128KX36, 7.5ns, CMOS, PQFP100

Part Image IDT71V3577S75PFI8 Integrated Device Technology Inc

Cache SRAM, 128KX36, 7.5ns, CMOS, PQFP100

Part Image 71V3577S75PF Integrated Device Technology Inc

Cache SRAM, 128KX36, 7.5ns, CMOS, PQFP100

Part Image 71V3577YS75PFG8 Integrated Device Technology Inc

Standard SRAM, 128KX36, 7.5ns, CMOS, PQFP100

For a full list of alternate parts for 71V3577S75PFG, check out Findchips.com