IEC-60747-5-5, OPEN COLLECTOR, TTL COMPATIBLE, UL RECOGNIZED
Configuration:
SINGLE
Data Rate-Nom:
1 MBps
Forward Current-Max:
0.02 A
Isolation Voltage-Max:
7500 V
JESD-609 Code:
e3
Mounting Feature:
SURFACE MOUNT
Number of Elements:
1
Number of Functions:
1
On-State Current-Max:
0.008 A
Operating Temperature-Max:
105 °C
Operating Temperature-Min:
-40 °C
Optoelectronic Device Type:
LOGIC IC OUTPUT OPTOCOUPLER
Packing Method:
TUBE
Response Time-Max:
0.000001 s
Response Time-Nom:
4e-7 ns
Supply Voltage-Min:
3 V
Surface Mount:
YES
Terminal Finish:
Tin (Sn)
ACNT-H50L-000E Frequently Asked Questions (FAQs)
Broadcom recommends a 4-layer PCB with a solid ground plane and a separate power plane for the ACNT-H50L-000E. The device should be placed near the center of the board, and the antenna should be at least 10mm away from any metal components or edges.
To ensure reliable communication, use a reliable SPI interface with a clock frequency of 1-10 MHz, and ensure that the host processor is configured to use the correct SPI mode (CPOL=0, CPHA=0). Also, use a pull-up resistor on the CS pin to prevent unwanted chip selects.
The ACNT-H50L-000E is rated for operation from -40°C to +85°C. However, for optimal performance, it is recommended to operate the device within the range of 0°C to +70°C.
To troubleshoot issues, start by checking the power supply voltage and ensuring that it is within the recommended range. Then, verify that the SPI interface is configured correctly and that the host processor is sending the correct commands. Use a logic analyzer or oscilloscope to debug the SPI communication. If issues persist, contact Broadcom support for further assistance.
Yes, the ACNT-H50L-000E is suitable for use in battery-powered devices. It has a low power consumption of 12mA in active mode and 2.5mA in standby mode, making it suitable for battery-powered applications.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ACNT-H50L-000E Overview
Use the download button to access the ACNT-H50L-000E schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ACNT-,
or try a keyword search, such as Optocoupler
