Description:Minimizes Unit-to-Unit Variation; UL1577, 4,170 VACRMS for 1 Minute; Safety and Regulatory Approvals:; Closely Matched Current Transfer Ratio (CTR); Very Low Coupled Capacitance Along With No Chip-to-Pin 6 Base Connection for Minimum Noise Susceptability (CNY17FXM, MOC8106M); Current Transfer Ratio In Select Groups; DIN-EN/IEC60747-5-5, 850 V Peak Working Insulation Voltage; High BVCEO: 70 V Minimum (CNY17XM, CNY17FXM, MOC8106M)
A good PCB layout practice is to keep the input and output circuits separate, use a ground plane, and minimize the loop area of the signal traces to reduce EMI.
To ensure reliability, follow the recommended operating temperature range, use a heat sink if necessary, and avoid exceeding the maximum junction temperature (Tj) of 150°C.
The maximum allowable voltage is 5V, exceeding which can cause damage to the device. It's recommended to use a voltage limiter or a resistor divider network to ensure the input voltage stays within the recommended range.
Choose a current-limiting resistor that ensures the LED current is within the recommended range (5-20mA) and takes into account the voltage supply, LED forward voltage, and desired current.
Store the CNY17F3SR2M in a dry, cool place, away from direct sunlight, and avoid exposing it to moisture, extreme temperatures, or physical stress.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
CNY17F3SR2M Overview
Use the download button to access the CNY17F3SR2M schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like CNY17,
or try a keyword search, such as Optocoupler
