The maximum voltage that can be applied to the VM pin is 16V. Exceeding this voltage may damage the device.
To configure the DRV8300 for 3-phase motor control, connect the motor windings to the OUTA, OUTB, and OUTC pins. Set the MODE pin to 3-phase mode (MODE = 1) and configure the dead-time and blanking time using the DT and BLNK pins.
The nFAULT pin is an active-low fault indicator that signals a fault condition, such as overcurrent, overtemperature, or undervoltage. It can be used to shut down the motor or trigger an interrupt in the microcontroller.
The current limit of the DRV8300 can be adjusted by connecting a resistor (RILIM) between the ILIM pin and GND. The current limit is inversely proportional to the value of RILIM.
To ensure proper thermal performance, it is recommended to use a 4-layer PCB with a solid ground plane, and to place the DRV8300 near the motor terminals. A heat sink may be required for high-current applications.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DRV8300DRGER Overview
Use the download button to access the DRV8300DRGER 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DRV83,
or try a keyword search, such as MOSFET Drivers
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
