ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
The DTA143ZU3T106 requires a bias voltage of 2.5V to 5.5V on the VCC pin, and a bias current of 1mA to 10mA on the IREF pin. Ensure that the bias voltage and current are within these ranges for optimal performance.
The maximum allowable power dissipation for the DTA143ZU3T106 is 1.5W. Exceeding this limit may cause the device to overheat and potentially fail.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input and output pins to protect the DTA143ZU3T106 from electrostatic discharge damage.
The recommended operating temperature range for the DTA143ZU3T106 is -40°C to 125°C. Operating the device outside of this range may affect its performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTA143ZU3T106 Overview
Use the download button to access the DTA143ZU3T106 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTA14,
or try a keyword search, such as Small Signal Bipolar Transistors
