Please enter a minimum 3 letters or numbers
Technical Content
Part Image

EL5375IUZ - Renesas Electronics

Description: The EL5175 and EL5375 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments. They are primarily targeted for applications such as receiving signals from twisted-pair lines or any application where common mode noise injection is likely to occur. The EL5175 and EL5375 are stable for a gain of one and requires two external resistors to set the voltage gain for each channel. The output common mode level is set by the reference pin (VREF), which has a -

Download EL5375IUZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
EL5375IUZ - Renesas Electronics - PCB symbol
click to zoom
PCB Footprints
EL5375IUZ - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - QSOP-24
click to zoom
3D Models
EL5375IUZ - Renesas Electronics - 3D model - Small Outline Packages - QSOP-24
click to zoom

EL5375IUZ Details

  • Manufacturer Part Number:

    EL5375IUZ

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    QSOP

  • Package Description:

    QSOP-24

  • Pin Count:

    24

  • Manufacturer Package Code:

    MDP0040

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2017-10-03

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    0

  • Differential Output:

    NO

  • Input Characteristics:

    DIFFERENTIAL

  • Interface IC Type:

    LINE RECEIVER

  • Interface Standard:

    GENERAL PURPOSE

  • JESD-30 Code:

    R-PDSO-G24

  • Length:

    8.6614 mm

  • Number of Functions:

    3

  • Number of Terminals:

    24

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    3.3 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SSOP

  • Package Equivalence Code:

    SSOP24,.24

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, SHRINK PITCH

  • Receiver Number of Bits:

    3

  • Seated Height-Max:

    1.7272 mm

  • Supply Current-Max:

    33 mA

  • Supply Voltage-Max:

    11 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.635 mm

  • Terminal Position:

    DUAL

  • Width:

    3.9116 mm

EL5375IUZ Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a ferrite bead or a 10-ohm resistor in series with the power supply to reduce noise.
  • The EL5375IUZ requires a single 5V power supply. Ensure that the power supply is clean and well-regulated. Power sequencing is not critical, but it's recommended to power up the analog supply (VCC) before the digital supply (VDD).
  • The recommended clock frequency is 10-40 MHz. The clock signal should have a low jitter (<100 ps) and a stable frequency to ensure accurate conversion. Use a high-quality clock source, such as a crystal oscillator or a low-jitter clock generator.
  • Use a low-pass filter (e.g., RC filter) to remove high-frequency noise from the analog input signal. Ensure the input signal is within the recommended range (0-2.5V) and use a high-impedance input buffer (e.g., op-amp) if necessary.
  • Keep analog and digital signals separate and use separate traces for each. Use a star-configuration for the analog signals and avoid crossing digital signals over analog signals. Use a ground plane to shield the analog signals.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

EL5375IUZ Overview

Use the download button to access the EL5375IUZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EL537, or try a keyword search, such as Line Driver or Receivers

Parts related to EL5375IUZ

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

EL5375IUZ Alternates

Showing results

Image Part Number Model
Part Image EL5375IUZ-T7 Intersil Corporation

Line Receiver, 3 Func, 3 Rcvr, BIPolar, PDSO24
Part Image EL5375IUZ Intersil Corporation

Line Receiver, 3 Func, 3 Rcvr, BIPolar, PDSO24
Part Image EL5375IU Renesas Electronics Corporation

Line Receiver, 3 Func, 3 Rcvr, BIPolar, PDSO24