BUILT-IN MEMORY, WITH DECODER/DRIVER, TTL COMPATIBLE
Color:
HIGH EFFICIENCY RED
Color@Wavelength:
Red
Configuration:
COMPLEX
Display Height:
7.4 mm
Forward Current-Max:
0.01 A
JESD-609 Code:
e1
Number of Characters:
1
Number of Functions:
1
Operating Temperature-Max:
85 °C
Operating Temperature-Min:
-55 °C
Optoelectronic Device Type:
4 X 7 DOT MATRIX LED DISPLAY
Peak Wavelength:
635 nm
Terminal Finish:
Tin/Silver/Copper (Sn/Ag/Cu)
HDSP-0762 Frequently Asked Questions (FAQs)
A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the input and output traces should be kept short and matched to minimize reflections.
The HDSP-0762 requires a bias voltage of 3.3V or 5V, depending on the application. Ensure that the bias voltage is stable and noise-free, and that the device is properly terminated to prevent oscillations.
The HDSP-0762 is designed to operate up to 6 GHz, but the actual operating frequency may be limited by the specific application and PCB layout. It's recommended to consult the datasheet and application notes for specific guidance.
The HDSP-0762 has a maximum junction temperature of 150°C. Ensure good airflow around the device, and consider using a heat sink or thermal pad to dissipate heat. Avoid blocking the airflow around the device.
The recommended drive strength for the HDSP-0762 is 50 ohms. Ensure that the driver impedance is matched to the device input impedance to minimize reflections and ensure optimal performance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
HDSP-0762 Overview
Use the download button to access the HDSP-0762 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like HDSP-,
or try a keyword search, such as LED Displays
