HFBR-2526Z footprint, schematic symbol and 3D model by Avago Technologies

Symbol

click to zoom

PCB Footprints

HFBR-2526Z - Avago Technologies PCB footprint - Other - Other - HFBR-2526Z-2

click to zoom

Datasheet Download Datasheet
Stock & Prices Price & Stock for HFBR-2526Z
Part Number HFBR-2526Z
Manufacturer Avago Technologies
Pin Count 6
Part Category Integrated Circuit
Package Category Other
Footprint Name Other - HFBR-2526Z-2
Released Date Aug 2, 2021
Last Modified Date Mar 7, 2023 4:10 PM UTC
Pinout / Pin List Click Here (Member Only)

HFBR-2526Z Details

Manufacturer Part Number:
HFBR-2526Z
Pbfree Code:
Yes
Rohs Code:
Yes
Part Life Cycle Code:
Obsolete
Reach Compliance Code:
Compliant
Manufacturer:
Avago Technologies
YTEOL:
0
Additional Feature:
IT HAS AC RESPONSIVITY 1 MM POF OF 3.9 MV/MICRO WATT, IT ALSO HAVE RECEIVER SENSITIVITY OF -28.5 DBM
Body Breadth:
10.2 mm
Body Height:
7.62 mm
Body Length or Diameter:
18.8 mm
Built-in Feature:
AMPLIFIER
Data Rate:
125 Mbps
Emitter/Detector Type:
PIN PHOTODIODE
Fiber Optic Device Type:
RECEIVER
Fiber Type:
HCS, POF
JESD-609 Code:
e3
Mounting Feature:
THROUGH HOLE MOUNT
Operating Temperature-Max:
70 °C
Operating Wavelength-Max:
660 nm
Operating Wavelength-Min:
640 nm
Operating Wavelength-Nom:
650 nm
Reception Type:
ANALOG
Responsivity:
3.9 A/W
Sensitivity:
-27.5 dBm
Supply Voltage-Max:
5.25 V
Supply Voltage-Min:
4.75 V
Supply Voltage-Nom:
5 V
Surface Mount:
NO
Terminal Finish:
MATTE TIN

HFBR-2526Z Frequently Asked Questions (FAQs)

A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The HFBR-2526Z should be placed near the edge of the board to minimize signal reflections. A 50Ω transmission line should be used to connect the module to the PCB.
The HFBR-2526Z is rated for operation up to 85°C. To ensure reliable operation in high-temperature environments, ensure good airflow, use a heat sink if necessary, and follow proper thermal design guidelines.
A 10uF capacitor in parallel with a 100nF capacitor, placed as close as possible to the VCC pin, is recommended for power supply decoupling.
Use an oscilloscope to check the signal integrity, ensure proper power supply decoupling, and verify that the module is properly seated and connected. Consult the datasheet and application notes for troubleshooting guidelines.
While the HFBR-2526Z is designed for IEEE 802.3ae compliance, it can be used in non-compliant applications with proper design and testing. However, Broadcom Limited may not provide support for non-compliant applications.

Trust Checks

Community Provided

System Verified

Community Approved

HFBR-2526Z Overview

Use the download button to access the HFBR-2526Z schematic symbol and PCB footprint.

To find more CAD model downloads similar to this part, try a partial part number search, like HFBR-, or try a keyword search, such as Fiber Optic Receivers

Suggested Parts

If you searched for HFBR-2526Z, you might also be interested in these parts:

Part Number
42.0071
901-9531-3SF
9316
CPV-PQ32/30-1S-12P-Z
RJ45-8LCT1-S
RJHSE-5F81
RJHSE-5F81-02
MIWI06-24S12
M20-9990645

Parts related to HFBR-2526Z

Showing 0 results

Image	Part Number	Model
	HFBR-2526Z Foxconn Receiver, 640nm Min, 660nm Max, 125Mbps, Through Hole Mount, ROHS COMPLIANT PACKAGE
	HFBR-2526 Hewlett Packard Co Receiver, 125Mbps, Panel Mount
	HFBR-2526Z Broadcom Limited Receiver, 640nm Min, 660nm Max, 125Mbps, Through Hole Mount
	HFBR-2526 Avago Technologies FIBER OPTIC RECEIVER, 640-660nm, 125Mbps, SURFACE MOUNT
For a full list of alternate parts for HFBR-2526Z, check out Findchips.com