Please enter a minimum 3 letters or numbers
Technical Content
Part Image

ICL7129ACPL+2 - Analog Devices

Description: LCD Drivers Low-Noise, 4 1/2 Digit, Single-Chip ADC with Multiplexed LCD Drivers

Download ICL7129ACPL+2 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
ICL7129ACPL+2 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
ICL7129ACPL+2 - Analog Devices PCB footprint - Dual-In-Line Packages - Dual-In-Line Packages - 40 PDIP
click to zoom
3D Models
ICL7129ACPL+2 - Analog Devices - 3D model - Dual-In-Line Packages - 40 PDIP
click to zoom

ICL7129ACPL+2 Details

  • Manufacturer Part Number:

    ICL7129ACPL+2

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    40-PDIP-600_MIL

  • Package Description:

    DIP, DIP40,.6

  • Pin Count:

    40

  • Manufacturer Package Code:

    40-PDIP-600_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.30

  • Date Of Intro:

    2002-06-04

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Analog Input Voltage-Max:

    2 V

  • Analog Input Voltage-Min:

    -3 V

  • Converter Type:

    ADC, DUAL-SLOPE

  • JESD-30 Code:

    R-PDIP-T40

  • JESD-609 Code:

    e3

  • Length:

    52.07 mm

  • Moisture Sensitivity Level:

    1

  • Number of Analog In Channels:

    1

  • Number of Bits:

    4

  • Number of Functions:

    1

  • Number of Terminals:

    40

  • Operating Temperature-Max:

    70 °C

  • Output Bit Code:

    BINARY

  • Output Format:

    PARALLEL, WORD

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    DIP

  • Package Equivalence Code:

    DIP40,.6

  • Package Shape:

    RECTANGULAR

  • Package Style:

    IN-LINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    5.08 mm

  • Supply Current-Max:

    1.4 mA

  • Supply Voltage-Nom:

    9 V

  • Surface Mount:

    NO

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    2.54 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    15.24 mm

ICL7129ACPL+2 Frequently Asked Questions (FAQs)

  • A good PCB layout for the ICL7129ACPL+2 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing noise coupling between the input and output stages. It's also recommended to use a low-ESR capacitor for the VCC pin and to keep the input and output traces as short as possible.
  • To ensure accurate temperature measurement, it's essential to calibrate the ICL7129ACPL+2 using a precision temperature source. Additionally, the thermocouple should be properly connected, and the cold junction compensation should be set correctly. It's also recommended to use a high-quality thermocouple and to minimize noise and interference in the measurement circuit.
  • The maximum cable length for the ICL7129ACPL+2's thermocouple input depends on the type of thermocouple and the noise environment. As a general rule, it's recommended to keep the cable length as short as possible (less than 10 feet) to minimize noise pickup and ensure accurate measurements. If a longer cable is necessary, it's recommended to use a shielded cable and to add noise filtering to the input stage.
  • No, the ICL7129ACPL+2 is specifically designed to work with thermocouples and is not compatible with thermistors or RTDs. If you need to measure temperature using a thermistor or RTD, you'll need to use a different IC or module that's specifically designed for that type of sensor.
  • The ICL7129ACPL+2 does not have internal registers that need to be programmed. It's a simple analog-to-digital converter that outputs a digital signal proportional to the input temperature. The device is configured using external resistors and capacitors, and no programming is required.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ICL7129ACPL+2 Overview

Use the download button to access the ICL7129ACPL+2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ICL71, or try a keyword search, such as Analog to Digital Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Suggested Parts

If you searched for ICL7129ACPL+2, you might also be interested in these parts:
Part Number
AD7484BSTZ
MM5Z4V7T1G
TSZU52C4V7 RGG
UC3907DW
UC3907N
ICL7107CM44Z
MOC3041TVM
B80C5000A
ICL7107CPLZ

Parts related to ICL7129ACPL+2

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

ICL7129ACPL+2 Alternates

Showing results

Image Part Number Model
Part Image ICL7129ACPL+2 Maxim Integrated Products

ADC, Dual-Slope, 4-Bit, 1 Func, 1 Channel, Parallel, Word Access, CMOS, PDIP40