The maximum operating frequency of the IR2131SPBF is 600 kHz, but it can be operated up to 1 MHz with reduced performance.
Proper thermal management can be achieved by providing a heat sink, ensuring good airflow, and keeping the device away from heat sources. The thermal pad on the bottom of the package should be connected to a copper plane on the PCB to dissipate heat.
The recommended layout and routing for the IR2131SPBF involves keeping the high-frequency switching nodes (e.g., VCC, VIN, and SW) as short and wide as possible, and keeping the sensitive analog nodes (e.g., VREF and ISENSE) away from the switching nodes.
The dead time and blanking time in the IR2131SPBF can be handled by adjusting the DT and BT pins, respectively. The dead time should be set to ensure that the high-side and low-side FETs are not conducting simultaneously, and the blanking time should be set to ensure that the current sense signal is not distorted.
The VREF pin on the IR2131SPBF is used to set the internal voltage reference, which is used to regulate the output voltage. The VREF pin should be connected to a stable voltage source, such as a voltage regulator or a resistive divider.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
IR2131SPBF Overview
Use the download button to access the IR2131SPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like IR213,
or try a keyword search, such as MOSFET Drivers
Suggested Parts
If you searched for IR2131SPBF, you might also be interested in these parts: