Description:The Renesas ISL317xE are ±15kV IEC61000 ESD protected, 3. 3V powered single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. These devices have very low bus currents (+125µA/-100µA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without violating the RS-485 specification's 32 unit load maximum, and without using repeaters. For example, in a remote utility meter reading system, individual meter readings are r
A good PCB layout for the ISL3170EIUZ-T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to place the device close to the power supply and use a low-ESR capacitor for the VCC pin.
To ensure proper power-up and initialization of the ISL3170EIUZ-T, make sure to follow the recommended power-up sequence, which involves applying VCC before applying any input signals. Also, ensure that the VCC pin is decoupled with a 0.1uF capacitor and that the device is properly reset by pulling the RESET pin low for at least 10ns.
The ISL3170EIUZ-T has a maximum junction temperature of 150°C. To ensure reliable operation, it's essential to provide adequate heat sinking and airflow to keep the device within its recommended operating temperature range. A thermal pad on the underside of the package can be connected to a ground plane or a heat sink to improve thermal dissipation.
To troubleshoot issues with the ISL3170EIUZ-T, start by verifying the power supply and clock signals. Check for proper voltage levels, clock frequency, and signal integrity. Use an oscilloscope to monitor the device's output and input signals. Also, consult the datasheet and application notes for guidance on troubleshooting common issues.
The ISL3170EIUZ-T has built-in ESD protection, but it's still essential to follow proper ESD handling procedures during device handling and PCB assembly. Use an ESD wrist strap or mat, and ensure that the device is stored in an ESD-protected package. Additionally, consider adding external ESD protection devices, such as TVS diodes, to further protect the device from ESD events.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL3170EIUZ-T Overview
Use the download button to access the ISL3170EIUZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL31,
or try a keyword search, such as Line Driver or Receivers
