Part Image

ISL3172EIUZ - Renesas Electronics

Description: The Renesas ISL317xE are ±15kV IEC61000 ESD protected, 3. 3V powered single transceivers that meet both the RS-485 and RS-422 standards for balanced communication. These devices have very low bus currents (+125µA/-100µA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 transceivers on the network without violating the RS-485 specification's 32 unit load maximum, and without using repeaters. For example, in a remote utility meter reading system, individual meter readings are r

Download ISL3172EIUZ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ISL3172EIUZ - Renesas Electronics PCB footprint - Small Outline Packages - Small Outline Packages - ISL1208IU8Z-TK
click to zoom
3D Models
ISL3172EIUZ - Renesas Electronics  - 3D model - Small Outline Packages - ISL1208IU8Z-TK
click to zoom

ISL3172EIUZ Details

  • Manufacturer Part Number:

    ISL3172EIUZ

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    MSOP

  • Pin Count:

    8

  • Manufacturer Package Code:

    M8.118

  • Country Of Origin:

    Malaysia, Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    12 Weeks

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    7

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    S-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    120 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    0.8 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    1500 ns

  • Width:

    3 mm

ISL3172EIUZ Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the analog and digital signal traces separate and avoid crossing them over each other.
  • Ensure that the device is properly decoupled with 0.1uF and 10uF capacitors, and that the PCB is designed to minimize thermal gradients. Also, follow the recommended operating conditions and derating guidelines.
  • The maximum cable length depends on the specific application and the type of cable used. As a general guideline, the ISL3172EIUZ can support cable lengths up to 100 meters at data rates up to 100 Mbps.
  • Use an oscilloscope to monitor the signal quality and check for noise, jitter, and signal attenuation. Also, verify that the device is properly configured and that the cable is properly terminated.
  • Yes, the ISL3172EIUZ can be used in redundant or fault-tolerant systems. However, additional external circuitry and software may be required to implement the redundancy or fault-tolerance mechanism.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL3172EIUZ Overview

Use the download button to access the ISL3172EIUZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL31, or try a keyword search, such as Line Driver or Receivers

Parts related to ISL3172EIUZ

Showing 0 results

ISL3172EIUZ Alternates

Showing results

Image Part Number Model
Part Image ISL3172EIUZ Intersil Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image ISL3172EIUZ-T Intersil Corporation

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8