Description:The ISL32600E, ISL32601E, ISL32602E, and ISL32603E are ±15kV IEC61000 ESD protected, micro-power, wide supply range transceivers for differential communication. The ISL32600E and ISL32601E operate with VCC ≥ 2. 7V and have maximum supply currents as low as 100µA with both the transmitter (Tx) and receiver (Rx) enabled. The ISL32602E and ISL32603E operate with supply voltages as low as 1. 8V. These transceivers have very low bus currents, so they present less than a 1/8 unit load to the bus. This allows more
Renesas provides a recommended PCB layout guide in the application note AN1995, which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize EMI.
The ISL32600EFBZ-T7A has a thermal pad that must be connected to a thermal plane on the PCB to dissipate heat. A thermal interface material (TIM) can be used to improve heat transfer. Additionally, the device has a thermal shutdown feature that turns off the device when the junction temperature exceeds 150°C.
Renesas recommends using a 10uF to 22uF X7R or X5R ceramic capacitor with a voltage rating of 6.3V or higher as the input capacitor. The capacitor should be placed as close as possible to the VIN pin to minimize noise and ensure stable operation.
The ISL32600EFBZ-T7A has a shutdown pin (SHDN) that can be used to put the device in low-power mode. When the SHDN pin is pulled low, the device enters a low-power state, reducing the quiescent current to less than 1uA. Additionally, the device has a low-power mode that can be enabled by setting the MODE pin to a logic low state.
The ISL32600EFBZ-T7A is designed to support cable lengths up to 5 meters, but the actual maximum cable length may vary depending on the specific application, cable type, and signal frequency. Renesas recommends using a shielded cable and following proper cable termination and routing practices to minimize signal degradation and EMI.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL32600EFBZ-T7A Overview
Use the download button to access the ISL32600EFBZ-T7A schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL32,
or try a keyword search, such as Line Driver or Receivers
