Part Image

ISL3283EIHZ-T - Renesas Electronics

Description: The Intersil ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E, ISL3285E are ±16. 5kV IEC61000 ESD Protected, 3. 0V to 5. 5V powered, single receivers that meet both the RS-485 and RS-422 standards for balanced communication. These receivers have very low bus currents (+125µA/-100µA), so they present a true “1/8 unit load” to the RS-485 bus. This allows up to 256 receivers on the network without violating the RS-485 specification’s 32 unit load maximum and without using repeaters. Receiver inputs feature a “

Download ISL3283EIHZ-T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
ISL3283EIHZ-T - Renesas Electronics PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - P6.064-ren1
click to zoom
3D Models
ISL3283EIHZ-T - Renesas Electronics  - 3D model - SOT23 (6-Pin) - P6.064-ren1
click to zoom

ISL3283EIHZ-T Details

  • Manufacturer Part Number:

    ISL3283EIHZ-T

  • Brand Name:

    Renesas

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOT23

  • Package Description:

    SOT-23, 6 PIN

  • Pin Count:

    6

  • Manufacturer Package Code:

    P6.064

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Factory Lead Time:

    12 Weeks

  • Date Of Intro:

    2017-11-14

  • Manufacturer:

    Renesas Electronics Corporation

  • YTEOL:

    7.1

  • High Level Input Current-Max:

    0.00125 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE RECEIVER

  • Interface Standard:

    EIA-485; EIA-422

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e3

  • Length:

    2.9 mm

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    0.75 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    60 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.45 mm

  • Supply Current-Max:

    0.5 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    1.6 mm

ISL3283EIHZ-T Frequently Asked Questions (FAQs)

  • A good PCB layout for the ISL3283EIHZ-T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the transmission lines. It's also recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper termination, use a 50-ohm termination resistor in series with the transmission line, and a 50-ohm load resistor to ground at the receiving end. Additionally, use a transmission line with a characteristic impedance of 50 ohms.
  • The maximum cable length supported by the ISL3283EIHZ-T depends on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths of up to 10 meters at data rates of up to 3.2 Gbps.
  • To configure the ISL3283EIHZ-T for low-power operation, use the device's power-down mode, which reduces the power consumption to less than 1 mA. Additionally, use the device's programmable output swing and de-emphasis features to optimize power consumption.
  • The recommended ESD protection for the ISL3283EIHZ-T involves using a TVS (Transient Voltage Suppressor) diode with a standoff voltage of 3.3V and a capacitance of 10nF. This provides protection against electrostatic discharge up to 8kV.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

ISL3283EIHZ-T Overview

Use the download button to access the ISL3283EIHZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL32, or try a keyword search, such as Line Driver or Receivers

Parts related to ISL3283EIHZ-T

Showing 0 results

ISL3283EIHZ-T Alternates

Showing results

Image Part Number Model
Part Image ISL3283EFHZ-T Renesas Electronics Corporation

Line Receiver, 1 Func, 1 Rcvr, BICMOS, PDSO6

Part Image ISL3283EFHZ-T7A Renesas Electronics Corporation

Line Receiver, 1 Func, 1 Rcvr, BICMOS, PDSO6

Part Image ISL3283EFHZ-T Intersil Corporation

Line Receiver, 1 Func, 1 Rcvr, BICMOS, PDSO6

Part Image ISL3283EIHZ-T Intersil Corporation

Line Receiver, 1 Func, 1 Rcvr, BICMOS, PDSO6