Description:A 26% smaller footprint is available with the ISL3298E TDFN package. This device also features a logic supply pin (VL) that sets the switching points of the DE and DI inputs to be compatible with a lower supply voltage in mixed voltage systems. For companion single RS-485 receivers in micro packages, please see the ISL3280E, ISL3281E, ISL3282E, ISL3283E, ISL3284E datasheet.
A good PCB layout for the ISL3295EIHZ-T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the input and output traces. Additionally, it's recommended to place the device close to the signal sources and loads to reduce noise and interference.
To ensure proper power and decoupling, connect the VCC pin to a clean, low-noise power supply, and decouple the device with a 0.1uF ceramic capacitor between VCC and GND, placed as close to the device as possible. Additionally, use a 10uF capacitor between VCC and GND for further filtering.
The ISL3295EIHZ-T can support data rates up to 400Mbps, but the actual achievable data rate depends on the specific application, PCB layout, and signal quality. It's recommended to consult the datasheet and application notes for more information on achieving high-speed data transmission.
To troubleshoot issues with the ISL3295EIHZ-T, start by verifying the power supply and decoupling, then check the signal integrity using an oscilloscope or logic analyzer. Ensure that the device is properly configured and that the input and output signals are within the specified voltage ranges. Consult the datasheet and application notes for more troubleshooting guidance.
Yes, the ISL3295EIHZ-T has a maximum junction temperature of 150°C. Ensure good airflow around the device, and consider using a heat sink or thermal pad if the device is expected to operate in high-temperature environments or under high-power conditions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL3295EIHZ-T Overview
Use the download button to access the ISL3295EIHZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL32,
or try a keyword search, such as Line Driver or Receivers
