Description:The ISL80121-5 is a low dropout voltage, single output LDO with programmable current limiting. The ISL80121-5 operates from input voltages of 5V to 6V with a nominal output voltage of 5V. Other custom voltage options are available upon request. A submicron BiCMOS process is utilized for this product family to deliver the best in class analog performance and overall value. The programmable current limiting improves system reliability of end applications. An external capacitor on the soft-start pin provides a
Renesas provides a recommended PCB layout in the ISL80121 evaluation board user manual, which includes guidelines for thermal vias, copper pours, and component placement to minimize thermal resistance and ensure optimal performance.
The ISL80121 has a power-on reset (POR) circuit that ensures the device is properly powered up and configured during startup. The POR circuit monitors the input voltage and releases the reset signal when the input voltage reaches the minimum operating voltage. Additionally, the device has a programmable soft-start feature that allows the output voltage to ramp up slowly to prevent inrush currents.
The maximum output current derating for high ambient temperatures is not explicitly stated in the datasheet, but it can be calculated using the thermal derating curves provided in the datasheet. For example, at an ambient temperature of 85°C, the maximum output current is derated to approximately 70% of the maximum rated output current.
To troubleshoot output voltage errors or deviations from the setpoint, check the input voltage, output voltage, and feedback voltage using an oscilloscope or multimeter. Verify that the input voltage is within the recommended operating range, and that the output voltage is within the specified tolerance. Also, check the feedback network and ensure that it is properly connected and configured.
The recommended input capacitor type and value depend on the specific application and operating conditions. However, as a general guideline, Renesas recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, and a voltage rating of at least 2x the maximum input voltage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL80121IR50Z-T Overview
Use the download button to access the ISL80121IR50Z-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL80,
or try a keyword search, such as Linear Regulator ICs
