Description:These devices are BiCMOS interface ICs that are user configured as either a single RS-422, RS-485 differential transceiver, or as a dual (2 Tx, 2 Rx) RS-232 transceiver. In RS-232 mode, the on-board charge pump generates RS-232 compliant ±5V Tx output levels, from a supply as low as 4.5V. Four small 0.1µF capacitors are required for the charge pump. The transceivers are RS-232 compliant, with the Rx inputs handling up to ±25V, and the Tx outputs handling ±12V. In RS-485 mode, the transceivers support both t
A good PCB layout for the ISL81387IBZ-T involves keeping the input and output capacitors close to the device, using a solid ground plane, and minimizing the length of the traces connecting the device to the input and output capacitors. Additionally, it is recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to reduce noise and improve performance.
To ensure stability, it is essential to follow the recommended component values and PCB layout guidelines provided in the datasheet. Additionally, it is crucial to ensure that the input voltage is within the recommended range, and the output capacitor is of sufficient value and type to maintain stability. It is also recommended to add a small ceramic capacitor (e.g., 10nF) in parallel with the output capacitor to improve stability.
The ISL81387IBZ-T is rated for operation over a temperature range of -40°C to +125°C. However, the device's performance and reliability may be affected at extreme temperatures. It is recommended to operate the device within a temperature range of -20°C to +85°C for optimal performance and reliability.
Yes, the ISL81387IBZ-T is suitable for use in high-reliability and automotive applications. The device is built with high-reliability materials and manufacturing processes, and it meets the requirements of the AEC-Q100 standard for automotive applications. However, it is essential to follow the recommended design and layout guidelines to ensure the device operates within its specified parameters.
To troubleshoot issues with the ISL81387IBZ-T, start by verifying that the input voltage is within the recommended range and that the output capacitor is of sufficient value and type. Check the PCB layout for any signs of noise or interference, and ensure that the device is properly decoupled from the power supply. Use an oscilloscope to measure the output voltage and current, and compare the results to the expected values. If the issue persists, consult the datasheet and application notes for further guidance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL81387IBZ-T Overview
Use the download button to access the ISL81387IBZ-T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL81,
or try a keyword search, such as Line Driver or Receivers
