The recommended PCB layout for LGG2G471MELB40 is to have a large copper area for heat dissipation, and to keep the component away from high-frequency signal lines to minimize electromagnetic interference (EMI).
The ESR of LGG2G471MELB40 is typically around 30mΩ. To handle ESR, you should consider it in your impedance calculations and ensure that your design can tolerate the additional resistance. You may also need to add a series resistor to limit the inrush current.
The derating curve for LGG2G471MELB40 is not explicitly provided in the datasheet, but it can be obtained from Nichicon Corporation's application notes or by contacting their technical support. The derating curve shows the reduction in capacitance and voltage rating at high temperatures.
LGG2G471MELB40 is designed to withstand vibrations up to 10Hz to 200Hz, 1.5mm double amplitude. If your application exceeds this vibration range, you should consult with Nichicon Corporation or consider using a different capacitor with higher vibration resistance.
To ensure the reliability of LGG2G471MELB40, follow proper storage and handling procedures, avoid exceeding the rated voltage and temperature, and ensure that the component is soldered correctly. You should also consider implementing overvoltage protection and surge protection in your design.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LGG2G471MELB40 Overview
Use the download button to access the LGG2G471MELB40 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LGG2G,
or try a keyword search, such as Aluminum Electrolytic Capacitors
