Nichicon recommends a PCB layout with a large copper area for the capacitor pads to reduce ESR. A minimum of 1 oz copper thickness is recommended, and the capacitor should be placed close to the power source to minimize loop inductance.
The LGR2E331MELA35 is designed to handle high-frequency ripple current, but it's essential to consider the capacitor's impedance at the frequency of interest. Nichicon provides impedance vs. frequency curves in the datasheet, which can be used to estimate the capacitor's behavior under high-frequency ripple current.
Nichicon recommends a voltage derating of 10% to 20% to ensure reliable operation and extend the capacitor's lifespan. This means that for a 35V rated capacitor, the maximum allowed voltage should be 31.5V to 33V.
The LGR2E331MELA35 is rated for operation up to 105°C, but its lifespan and performance may be affected at high temperatures. Nichicon recommends consulting the datasheet and application notes for guidance on using the capacitor in high-temperature environments.
The LGR2E331MELA35 is designed to handle surge currents during power-on and power-off, but it's essential to consider the capacitor's surge current rating and the system's inrush current requirements. Nichicon recommends consulting the datasheet and application notes for guidance on surge current handling.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LGR2E331MELA35 Overview
Use the download button to access the LGR2E331MELA35 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LGR2E,
or try a keyword search, such as Aluminum Electrolytic Capacitors
