Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LT1354CS8 - Analog Devices

Description: High Speed Operational Amplifiers LT1354 - 12MHz, 400V/us Op Amp

Download LT1354CS8 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LT1354CS8 - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LT1354CS8 - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8-Lead Plastic Small Outline (Narrow .150 Inch)
click to zoom
3D Models
LT1354CS8 - Analog Devices - 3D model - Small Outline Packages - 8-Lead Plastic Small Outline (Narrow .150 Inch)
click to zoom

LT1354CS8 Details

  • Manufacturer Part Number:

    LT1354CS8

  • Part Life Cycle Code:

    Obsolete

  • Package Description:

    PLASTIC, SO-8

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.3 µA

  • Bias Current-Max (IIB) @25C:

    0.3 µA

  • Common-mode Reject Ratio-Min:

    97 dB

  • Common-mode Reject Ratio-Nom:

    80 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    800 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e0

  • Length:

    4.9 mm

  • Low-Bias:

    NO

  • Low-Offset:

    YES

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -16 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    200 V/us

  • Slew Rate-Nom:

    400 V/us

  • Supply Current-Max:

    1.25 mA

  • Supply Voltage Limit-Max:

    16 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    TIN LEAD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Unity Gain BW-Nom:

    12000

  • Voltage Gain-Min:

    5000

  • Wideband:

    NO

  • Width:

    3.9 mm

LT1354CS8 Frequently Asked Questions (FAQs)

  • The LT1354CS8 is a high-frequency device and requires careful layout and placement to minimize noise and ensure optimal performance. It is recommended to place the device close to the power supply, use a solid ground plane, and keep the input and output traces short and separate. Additionally, it is recommended to use a low-ESR capacitor for the output filter and to decouple the power supply pins.
  • To ensure the LT1354CS8 is stable and does not oscillate, it is recommended to follow the recommended layout and placement guidelines, use a low-ESR output capacitor, and ensure that the input and output impedance are matched. Additionally, it is recommended to add a small resistor (typically 1-10 ohms) in series with the output capacitor to dampen any oscillations.
  • The maximum input voltage that the LT1354CS8 can handle is 15V. Exceeding this voltage can cause damage to the device. It is recommended to use a voltage regulator or a voltage limiter to ensure that the input voltage does not exceed the maximum rating.
  • Yes, the LT1354CS8 can be used in a switching regulator application. However, it is recommended to use a switching frequency above 100 kHz to minimize the effects of the device's internal compensation. Additionally, it is recommended to use a low-ESR output capacitor and to ensure that the input and output impedance are matched.
  • The output voltage of the LT1354CS8 can be calculated using the following formula: Vout = (R1/R2) * (Vin - Vref), where R1 and R2 are the resistors in the feedback network, Vin is the input voltage, and Vref is the reference voltage (typically 2.5V).

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT1354CS8 Overview

Use the download button to access the LT1354CS8 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT135, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT1354CS8

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LT1354CS8 Alternates

Showing results

Image Part Number Model
Part Image LT1354CS8#PBF Linear Technology

Operational Amplifier, 1 Func, 800uV Offset-Max, BIPolar, PDSO8
Part Image LT1354CS8 Linear Technology

Operational Amplifier, 1 Func, 800uV Offset-Max, BIPolar, PDSO8
Part Image LT1354CS8#TR Linear Technology

Operational Amplifier, 1 Func, 800uV Offset-Max, BIPolar, PDSO8