Part Image

LT6001IDD#PBF - Analog Devices

Description: Dual 1.8V, 13µA Standard (General Purpose) Amplifier 2 Circuit Rail-to-Rail 10-DFN (3x3)

Download LT6001IDD#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LT6001IDD#PBF - Analog Devices PCB footprint - Small Outline No-lead - Small Outline No-lead - LFCSP_2026
click to zoom

LT6001IDD#PBF Details

  • Manufacturer Part Number:

    LT6001IDD#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    3 X 3 MM, LEAD FREE, PLASTIC, MO-229WEED-2, DFN-10

  • Pin Count:

    10

  • Manufacturer Package Code:

    05-08-1699

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.01 µA

  • Common-mode Reject Ratio-Min:

    82 dB

  • Common-mode Reject Ratio-Nom:

    96 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    1200 µV

  • JESD-30 Code:

    S-PDSO-N10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Low-Bias:

    YES

  • Low-Offset:

    YES

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Equivalence Code:

    SOLCC10,.12,20

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.8 mm

  • Slew Rate-Min:

    5000 V/us

  • Slew Rate-Nom:

    15000 V/us

  • Supply Current-Max:

    0.024 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    50

  • Voltage Gain-Min:

    25000

  • Wideband:

    NO

  • Width:

    3 mm

LT6001IDD#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT6001 involves keeping the input and output traces short and separate, using a solid ground plane, and placing the bypass capacitors close to the device. A 4-layer PCB with a dedicated power plane and a dedicated ground plane is recommended.
  • To ensure stability, make sure to follow the recommended compensation network, use a minimum output capacitance of 10uF, and avoid capacitive loads. Also, ensure that the input voltage is within the recommended range and the device is operated within its specified temperature range.
  • The maximum power dissipation of the LT6001 is dependent on the package type and the ambient temperature. For the DFN package, the maximum power dissipation is 1.4W at 25°C ambient temperature. However, it is recommended to derate the power dissipation based on the ambient temperature and the thermal resistance of the package.
  • While the LT6001 can be used as a voltage regulator, it is not recommended due to its limited output current capability and lack of built-in short-circuit protection. The LT6001 is primarily designed as an op-amp and is best suited for signal amplification and conditioning applications.
  • To protect the LT6001 from ESD damage, handle the device with anti-static precautions, use an ESD-protected work surface, and ensure that the device is properly grounded during handling and assembly. Additionally, consider adding ESD protection devices such as TVS diodes or ESD protection arrays to the PCB design.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT6001IDD#PBF Overview

Use the download button to access the LT6001IDD#PBF schematic symbol and PCB footprint.
To find more CAD model downloads similar to this part, try a partial part number search, like LT600, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT6001IDD#PBF

Showing 0 results

LT6001IDD#PBF Alternates

Showing results

Image Part Number Model
Part Image LT6001IDD#TRPBF Analog Devices Inc

Operational Amplifier, 2 Func, 1200uV Offset-Max, BIPolar, PDSO10

Part Image LT6001IDD Linear Technology

Operational Amplifier, 2 Func, 1200uV Offset-Max, BIPolar, PDSO10

Part Image LT6001IDD#TR Linear Technology

Operational Amplifier, 2 Func, 1200uV Offset-Max, BIPolar, PDSO10

Part Image LT6001IDD#PBF Linear Technology

Operational Amplifier, 2 Func, 1200uV Offset-Max, BIPolar, PDSO10