Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC2704CGW-16#PBF - Analog Devices

Description: LINEAR TECHNOLOGY - LTC2704CGW-16#PBF - Digital to Analogue Converter, Quad, 16 bit, 3 Wire, Serial, SPI, 4.5V to 16.5V, SSOP, 44 Pins

Download LTC2704CGW-16#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC2704CGW-16#PBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC2704CGW-16#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - GW Package 44-Lead Plastic SSOP (Wide .300 Inch) (Reference LTC DWG # 05-08-1642)
click to zoom
3D Models
LTC2704CGW-16#PBF - Analog Devices - 3D model - Small Outline Packages - GW Package 44-Lead Plastic SSOP (Wide .300 Inch) (Reference LTC DWG # 05-08-1642)
click to zoom

LTC2704CGW-16#PBF Details

  • Manufacturer Part Number:

    LTC2704CGW-16#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    0.300 INCH, LEAD FREE, PLASTIC, SSOP-44

  • Pin Count:

    44

  • Manufacturer Package Code:

    05-08-1642 (GW44)

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Analog Output Voltage-Max:

    10 V

  • Analog Output Voltage-Min:

    -10 V

  • Converter Type:

    D/A CONVERTER

  • Input Bit Code:

    BINARY

  • Input Format:

    SERIAL

  • JESD-30 Code:

    R-PDSO-G44

  • JESD-609 Code:

    e3

  • Length:

    17.83 mm

  • Linearity Error-Max (EL):

    0.0031%

  • Moisture Sensitivity Level:

    3

  • Number of Bits:

    16

  • Number of Functions:

    1

  • Number of Terminals:

    44

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SSOP

  • Package Equivalence Code:

    SOP44,.4,32

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    2.64 mm

  • Settling Time-Nom (tstl):

    10 µs

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.8 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7.5 mm

LTC2704CGW-16#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LTC2704CGW-16 involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces connecting the IC to the capacitors and resistors. A 4-layer PCB with a dedicated ground plane is recommended.
  • To ensure proper powering and decoupling of the LTC2704CGW-16, use a high-quality, low-ESR capacitor (e.g., 10uF ceramic) between the VCC and GND pins, and add a 1uF ceramic capacitor between the VCC and AVCC pins. Additionally, use a 0.1uF ceramic capacitor between the VCC and GND pins for each supply pin.
  • The maximum clock frequency for the LTC2704CGW-16 is 50MHz. However, the actual clock frequency may be limited by the specific application and the quality of the clock signal.
  • The LTC2704CGW-16 can be programmed using a serial interface (SPI or I2C) to configure the device for a specific application. The programming sequence and data format are described in the datasheet. A development board or a microcontroller can be used to program the device.
  • The LTC2704CGW-16 has a thermal pad on the bottom of the package, which should be connected to a thermal plane on the PCB to dissipate heat. A thermal interface material (e.g., thermal tape or thermal grease) can be used to improve heat transfer between the IC and the PCB.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC2704CGW-16#PBF Overview

Use the download button to access the LTC2704CGW-16#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC27, or try a keyword search, such as Digital to Analog Converters

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC2704CGW-16#PBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LTC2704CGW-16#PBF Alternates

Showing results

Image Part Number Model
Part Image LTC2704CGW-16#PBF Linear Technology

D/A Converter, 1 Func, Serial Input Loading, 10us Settling Time, PDSO44
Part Image LTC2704CGW-16 Linear Technology

D/A Converter, 4 Func, Serial Input Loading, 10us Settling Time, PDSO44
Part Image LTC2704CGW-16 Analog Devices Inc

D/A Converter, 4 Func, Serial Input Loading, 10us Settling Time, PDSO44