Part Image

LTC4364HS-1#PBF - Analog Devices

Description: n Wide Operating Voltage Range: 4V to 80V n Withstands Surges Over 80V with VCC Clamp n Adjustable Output Clamp Voltage n Ideal Diode Controller Holds Up Output Voltage During Input Brownouts n Reverse Input Protection to –40V n Reverse Output Protection to –20V n Overcurrent Protection n Low 10μA Shutdown Current at 12V n Adjustable Fault Timer n 0.1% Retry Duty Cycle During Faults (LTC4364-2) n Available in 4mm × 3mm 14-Lead DFN, 16-Lead MSOP, and 16-Lead SO Packages n AEC-Q100 Qualified for

Download LTC4364HS-1#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LTC4364HS-1#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S Package 16-Lead Plastic Small Outline (Narrow .150 Inch)
click to zoom
3D Models
LTC4364HS-1#PBF - Analog Devices  - 3D model - Small Outline Packages - S Package 16-Lead Plastic Small Outline (Narrow .150 Inch)
click to zoom

LTC4364HS-1#PBF Details

  • Manufacturer Part Number:

    LTC4364HS-1#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SOIC-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    05-08-1610 (S16)

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Additional Feature:

    VOUT RESET THRESHOLD VOLTAGE IS 2.2 VOLT

  • Adjustable Threshold:

    NO

  • Analog IC - Other Type:

    INPUT FAULT PROTECTION CONTROLLER

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    9.906 mm

  • Moisture Sensitivity Level:

    1

  • Number of Channels:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP16,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    1.752 mm

  • Supply Current-Max (Isup):

    0.75 mA

  • Supply Voltage-Max (Vsup):

    80 V

  • Supply Voltage-Min (Vsup):

    4 V

  • Supply Voltage-Nom (Vsup):

    12 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Threshold Voltage-Nom:

    +2.2V

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.899 mm

LTC4364HS-1#PBF Frequently Asked Questions (FAQs)

  • The maximum voltage rating for the VIN pin is 80V, but it's recommended to keep it below 60V for reliable operation.
  • The sense resistor value depends on the maximum current you expect in your application. A good starting point is to use the formula Rsense = 0.05 / Imax, where Imax is the maximum expected current. You can then adjust the value based on your specific requirements.
  • The EN pin is an active-high enable input that allows you to turn the device on and off. You can connect it to a logic signal or a switch to control the device's operation. When EN is high, the device is enabled, and when it's low, the device is disabled.
  • The OVP threshold is set by the voltage on the OV pin. You can connect a resistor divider network to the OV pin to set the desired threshold voltage. The datasheet provides a formula to calculate the required resistor values based on the desired OVP threshold.
  • The FAULT pin is an open-drain output that indicates when a fault condition occurs, such as overcurrent or overvoltage. You can connect it to a microcontroller or a logic circuit to detect and respond to fault conditions.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC4364HS-1#PBF Overview

Use the download button to access the LTC4364HS-1#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC43, or try a keyword search, such as Power Management Circuits

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC4364HS-1#PBF

Showing 0 results

LTC4364HS-1#PBF Alternates

Showing results

Image Part Number Model
Part Image LTC4364CS-2#PBF Linear Technology

INPUT FAULT PROTECTION CONTROLLER, Adjustable, 1 Channel, CMOS, PDSO16

Part Image LTC4364IS-2#TRPBF Linear Technology

INPUT FAULT PROTECTION CONTROLLER, Adjustable, 1 Channel, CMOS, PDSO16

Part Image LTC4364CS-1#PBF Linear Technology

INPUT FAULT PROTECTION CONTROLLER, Adjustable, 1 Channel, CMOS, PDSO16

Part Image LTC4364HS-1#PBF Linear Technology

INPUT FAULT PROTECTION CONTROLLER, Adjustable, 1 Channel, CMOS, PDSO16

Part Image LTC4364CS-1#TRPBF Linear Technology

INPUT FAULT PROTECTION CONTROLLER, Adjustable, 1 Channel, CMOS, PDSO16

For a full list of alternate parts for LTC4364HS-1#PBF, check out Findchips.com