Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX13051ESA+T - Analog Devices

Description: ♦ Fully Compatible with the ISO 11898 Standard ♦ Autobaud Mode ♦ Short-Circuit Protection ♦ High-Speed Operation Up to 1Mbps ♦ Slope-Control Mode ♦ Low-Current Standby Mode ♦ Thermal Shutdown ♦ Transmit Data Dominant Timeout ♦ ±6kV Human Body Model ESD Protection ♦ Greater than ±12V Common-Mode Range

Download MAX13051ESA+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX13051ESA+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX13051ESA+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - so8-----
click to zoom
3D Models
MAX13051ESA+T - Analog Devices - 3D model - Small Outline Packages - so8-----
click to zoom

MAX13051ESA+T Details

  • Manufacturer Part Number:

    MAX13051ESA+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    SOP, SOP8,.25

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.01

  • Date Of Intro:

    2004-11-18

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Data Rate:

    1000 Mbps

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Number of Transceivers:

    1

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    0.072 mA

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Telecom IC Type:

    INTERFACE CIRCUIT

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

MAX13051ESA+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX13051ESA+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals to minimize noise and interference.
  • To ensure proper powering and decoupling of the MAX13051ESA+T, use a high-quality power supply with low noise and ripple. Add decoupling capacitors (e.g., 10uF and 100nF) close to the device's power pins, and consider adding a ferrite bead or inductor in series with the power supply to filter out high-frequency noise.
  • The MAX13051ESA+T has an operating temperature range of -40°C to +125°C. However, it's essential to note that the device's performance may degrade at extreme temperatures, and the maximum junction temperature should not exceed 150°C.
  • To troubleshoot issues with the MAX13051ESA+T, start by verifying the power supply and decoupling. Check the input voltage, output voltage, and current consumption using an oscilloscope or multimeter. Ensure that the device is properly configured and that the layout is correct. If issues persist, consult the datasheet and application notes or contact Analog Devices' technical support for further assistance.
  • The MAX13051ESA+T is a high-reliability device, but it's essential to follow proper design and testing procedures to ensure the device meets the required safety and reliability standards. Consult the datasheet and relevant industry standards (e.g., IEC 61508, ISO 26262) to ensure the device is used in a way that meets the application's requirements.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX13051ESA+T Overview

Use the download button to access the MAX13051ESA+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX13, or try a keyword search, such as Network Interfaces

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX13051ESA+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX13051ESA+T Alternates

Showing results

Image Part Number Model
Part Image MAX13051ESA+T Maxim Integrated Products

Interface Circuit, 1-Trnsvr, BICMOS, PDSO8