Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX13088EESA+T - Analog Devices

Description: RS-422/RS-485 Interface IC +5.0V, +/-15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

Download MAX13088EESA+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX13088EESA+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX13088EESA+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S8+4
click to zoom
3D Models
MAX13088EESA+T - Analog Devices - 3D model - Small Outline Packages - S8+4
click to zoom

MAX13088EESA+T Details

  • Manufacturer Part Number:

    MAX13088EESA+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    SOP, SOP8,.25

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2005-02-18

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    2 V

  • Output Low Current-Max:

    0.001 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    80 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    1.8 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    4.5 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    50 ns

  • Width:

    3.9 mm

MAX13088EESA+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX13088EESA+T involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals to minimize noise and interference.
  • The MAX13088EESA+T has a programmable input voltage range. To configure it, you need to set the appropriate values for the VREF and VOS pins. The datasheet provides a table that shows the recommended values for different input voltage ranges. You can also use the MAX13088EESA+T evaluation board to experiment with different configurations.
  • The maximum cable length that can be used with the MAX13088EESA+T depends on the specific application and the type of cable used. As a general rule, it's recommended to keep the cable length as short as possible to minimize signal attenuation and noise. However, the MAX13088EESA+T can drive cables up to 100 meters long with proper termination and signal conditioning.
  • The MAX13088EESA+T is rated for operation up to 125°C. However, the device's performance and accuracy may degrade at high temperatures. It's recommended to consult the datasheet and perform thorough testing to ensure that the device meets the required specifications in the target application.
  • To troubleshoot common issues with the MAX13088EESA+T, start by checking the power supply and ensuring that it's within the recommended range. Next, verify that the input signals are within the specified range and that the device is properly configured. Use an oscilloscope to check the output signal and look for signs of noise or distortion. Finally, consult the datasheet and application notes for troubleshooting guides and tips.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX13088EESA+T Overview

Use the download button to access the MAX13088EESA+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX13, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX13088EESA+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX13088EESA+T Alternates

Showing results

Image Part Number Model
Part Image MAX13088EESA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX13088ECSA+ Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX13088ECSA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX13088EESA+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX13088ECSA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
For a full list of alternate parts for MAX13088EESA+T, check out Findchips.com