Part Image

MAX13433EESD+T - Analog Devices

Description: RS-485 Interface IC Txrx RS-485 16Mbps Full

Download MAX13433EESD+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX13433EESD+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - SOIC 14
click to zoom
3D Models
MAX13433EESD+T - Analog Devices  - 3D model - Small Outline Packages - SOIC 14
click to zoom

MAX13433EESD+T Details

  • Manufacturer Part Number:

    MAX13433EESD+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    14-SOIC_N-150_MIL

  • Package Description:

    ROHS COMPLIANT, SOP-14

  • Pin Count:

    14

  • Manufacturer Package Code:

    14-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2008-11-20

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485; TIA-485

  • JESD-30 Code:

    R-PDSO-G14

  • JESD-609 Code:

    e3

  • Length:

    8.65 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    14

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.001 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP14,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    80 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    2 mA

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    1.62 V

  • Supply Voltage-Nom:

    1.8 V

  • Supply Voltage1-Max:

    5.5 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    50 ns

  • Width:

    3.9 mm

MAX13433EESD+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX13433EESD+T involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing trace lengths and widths to reduce noise and EMI. Additionally, placing the device close to the signal sources and using a low-ESR capacitor for the VCC pin can improve performance.
  • To ensure proper power and decoupling, connect the VCC pin to a clean, low-noise power supply, and use a 0.1uF to 1uF ceramic capacitor between VCC and GND, placed as close to the device as possible. Additionally, consider adding a 10uF to 22uF bulk capacitor in parallel to further reduce noise and ripple.
  • The MAX13433EESD+T can support data rates up to 100Mbps, but the actual achievable data rate depends on the specific application, cable length, and signal quality. It's recommended to consult the datasheet and application notes for more information on data rate limitations and optimization techniques.
  • To troubleshoot issues with the MAX13433EESD+T, start by verifying the power supply and decoupling, then check the signal integrity using an oscilloscope or logic analyzer. Look for signs of noise, jitter, or signal distortion, and consult the datasheet and application notes for guidance on optimizing signal quality and reducing errors.
  • The MAX13433EESD+T is a RS-485 transceiver, and it can be used with other RS-485 devices and protocols. However, compatibility with other transceiver devices or protocols may require additional circuitry or configuration. It's recommended to consult the datasheet and application notes for more information on compatibility and interoperability.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX13433EESD+T Overview

Use the download button to access the MAX13433EESD+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX13, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX13433EESD+T

Showing 0 results

MAX13433EESD+T Alternates

Showing results

Image Part Number Model
Part Image MAX13433EESD+ Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO14

Part Image MAX13433EESD/V+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO14

Part Image MAX13433EESD/V+T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO14