Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX14935BAWE+ - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX14935BAWE+ - DIGITAL ISOLATOR, 4-CH, 27.5NS, WSOIC-16

Download MAX14935BAWE+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX14935BAWE+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX14935BAWE+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - MAX 16 Wide SO
click to zoom
3D Models
MAX14935BAWE+ - Analog Devices - 3D model - Small Outline Packages - MAX 16 Wide SO
click to zoom

MAX14935BAWE+ Details

  • Manufacturer Part Number:

    MAX14935BAWE+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-SOIC_W-300_MIL

  • Package Description:

    SOIC-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-SOIC_W-300_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.01

  • Date Of Intro:

    2014-09-28

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Interface IC Type:

    DIGITAL ISOLATOR

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    10.3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    4

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Seated Height-Max:

    2.65 mm

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    1.71 V

  • Supply Voltage-Nom:

    1.8 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    7.5 mm

MAX14935BAWE+ Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX14935BAWE+ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated layer for the analog signals, and to keep the digital signals away from the analog signals.
  • To ensure reliable communication, make sure to use a proper SPI protocol, with a clock frequency within the recommended range (up to 10MHz). Also, ensure that the microcontroller's SPI pins are 5V tolerant, and use a level translator if necessary. Additionally, use a pull-up resistor on the CS pin and a pull-down resistor on the INT pin.
  • The maximum cable length supported by the MAX14935BAWE+ depends on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 100 meters at a data rate of 100kbps. For longer cable lengths, it's recommended to use repeaters or amplifiers to ensure signal integrity.
  • The MAX14935BAWE+ has built-in error detection and fault handling mechanisms. For example, it has a parity bit for data transmission, and it can detect errors such as CRC errors, framing errors, and overrun errors. In case of an error, the device will set the corresponding error flag, and the microcontroller can take appropriate action to recover from the error.
  • The recommended power-up sequence for the MAX14935BAWE+ is to first power up the VCC supply, followed by the VDD supply. The VCC supply should be powered up first to ensure that the internal voltage regulators are enabled before the VDD supply is powered up. Additionally, it's recommended to add a power-up reset circuit to ensure that the device is properly reset during power-up.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX14935BAWE+ Overview

Use the download button to access the MAX14935BAWE+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX14, or try a keyword search, such as Other Interface ICs

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX14935BAWE+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑