Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3077EASA+T - Analog Devices

Description: RS-422/RS-485 Interface IC +3.3V, +/-15kV ESD-Protected, Fail-Safe, Hot-Swap, RS-485/RS-422 Transceivers

Download MAX3077EASA+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3077EASA+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3077EASA+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S8+4
click to zoom
3D Models
MAX3077EASA+T - Analog Devices - 3D model - Small Outline Packages - S8+4
click to zoom

MAX3077EASA+T Details

  • Manufacturer Part Number:

    MAX3077EASA+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, MS-012AA, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2002-11-22

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    8.5

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485; TIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Low Current-Max:

    0.001 A

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    75 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    1.5 mA

  • Supply Voltage-Max:

    3.63 V

  • Supply Voltage-Min:

    2.97 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    50 ns

  • Width:

    3.9 mm

MAX3077EASA+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX3077EASA+T involves keeping the signal traces short and away from noise sources, using a solid ground plane, and placing the device close to the signal source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and EMI.
  • To ensure proper termination for high-speed signals, use a 50Ω termination resistor in series with the signal line, and place it as close to the MAX3077EASA+T as possible. Additionally, use a 100nF capacitor in parallel with the termination resistor to filter out high-frequency noise.
  • The maximum cable length supported by the MAX3077EASA+T depends on the specific application and the type of cable used. However, as a general rule, the MAX3077EASA+T can support cable lengths up to 100 meters at data rates up to 100Mbps. For longer cable lengths or higher data rates, it's recommended to use repeaters or active cables.
  • The MAX3077EASA+T can be configured for half-duplex or full-duplex operation by setting the appropriate pins high or low. For half-duplex operation, set the TXEN pin high and the RXEN pin low. For full-duplex operation, set both the TXEN and RXEN pins high. Consult the datasheet for specific pin configurations and timing diagrams.
  • The power consumption of the MAX3077EASA+T depends on the specific application and operating conditions. However, the typical power consumption is around 150mA at 3.3V. To reduce power consumption, consider using a lower supply voltage, reducing the clock frequency, or using the device's power-down mode when not in use.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3077EASA+T Overview

Use the download button to access the MAX3077EASA+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX30, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Suggested Parts

If you searched for MAX3077EASA+T, you might also be interested in these parts:
Part Number
DTC023YEBTL
MIMXRT1021DAG5A
RT1020-STDCQG84B
SSW-110-01-F-S
MAX3077EESA+
SZNUP2105LT1G
206760-0001
44428-0405
46622-0301

Parts related to MAX3077EASA+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3077EASA+T Alternates

Showing results

Image Part Number Model
Part Image MAX3077EASA+ Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX3077EASA/GG8 Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX3077EASA/GG8 Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX3077EASA-T Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
Part Image MAX3077EASA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8
For a full list of alternate parts for MAX3077EASA+T, check out Findchips.com