Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX3097ECEE+T - Analog Devices

Description: RS-422/RS-485 Interface IC +/-15kV ESD-Protected, 32Mbps, 3V/5V,Triple RS-422/RS-485 Receivers with Fault Detection

Download MAX3097ECEE+T Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX3097ECEE+T - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX3097ECEE+T - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - E16+1
click to zoom
3D Models
MAX3097ECEE+T - Analog Devices - 3D model - Small Outline Packages - E16+1
click to zoom

MAX3097ECEE+T Details

  • Manufacturer Part Number:

    MAX3097ECEE+T

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    16-QSOP-150_MIL

  • Package Description:

    SSOP,

  • Pin Count:

    16

  • Manufacturer Package Code:

    16-QSOP-150_MIL

  • Reach Compliance Code:

    Compliant

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2000-08-10

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE RECEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    4.89 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    3

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SSOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    85 ns

  • Receiver Number of Bits:

    3

  • Seated Height-Max:

    1.73 mm

  • Supply Voltage-Max:

    5.5 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.635 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3.9 mm

MAX3097ECEE+T Frequently Asked Questions (FAQs)

  • A good PCB layout for the MAX3097ECEE+T involves keeping the signal traces short, using a solid ground plane, and placing the device close to the connector. Additionally, it's recommended to use a common-mode choke and ferrite beads to filter out high-frequency noise.
  • To ensure proper termination for RS-485 applications, a 120Ω termination resistor should be connected between the Y and Z pins of the MAX3097ECEE+T. This resistor should be placed as close to the device as possible to minimize reflections and ensure reliable data transmission.
  • The maximum cable length supported by the MAX3097ECEE+T for RS-485 applications depends on the data rate and cable characteristics. As a general rule, the maximum cable length is approximately 4000 feet (1219 meters) at a data rate of 10 Mbps. However, this can be extended to 10,000 feet (3048 meters) or more with the use of repeaters or optimized cable designs.
  • The MAX3097ECEE+T can be configured for half-duplex or full-duplex operation by controlling the DE (driver enable) and RE (receiver enable) pins. For half-duplex operation, the DE and RE pins should be tied together and controlled by a single signal. For full-duplex operation, the DE and RE pins should be controlled separately to enable simultaneous transmission and reception.
  • The recommended power-up sequence for the MAX3097ECEE+T is to apply the power supply voltage (VCC) before applying the logic input signals. This ensures that the device is properly biased and configured before the inputs are applied, preventing latch-up or damage.

Trust Checks

This model has been verified by system checks.
System Verified
Sponsored

MAX3097ECEE+T Overview

Use the download button to access the MAX3097ECEE+T schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX30, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3097ECEE+T

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX3097ECEE+T Alternates

Showing results

Image Part Number Model
Part Image MAX3097ECEE Rochester Electronics LLC

TRIPLE LINE RECEIVER, PDSO16, 0.150 INCH, 0.025 INCH PITCH, QSOP-16
Part Image MAX3097ECEE+T Maxim Integrated Products

Line Receiver, 3 Func, 3 Rcvr, CMOS, PDSO16
Part Image MAX3097EEEE-T Maxim Integrated Products

Line Receiver, 3 Func, 3 Rcvr, CMOS, PDSO16
Part Image MAX3097ECEE-T Maxim Integrated Products

Line Receiver, 3 Func, 3 Rcvr, CMOS, PDSO16
Part Image MAX3097EEEE Maxim Integrated Products

Line Receiver, 3 Func, 3 Rcvr, CMOS, PDSO16
For a full list of alternate parts for MAX3097ECEE+T, check out Findchips.com